Schluter®-DILEX-KSN

Surface movement joint profile with replaceable rubber insert

Schluter®-DILEX-KSN is a heavy-duty surface joint profile with stainless steel or aluminum anchoring legs that protect tile edges. It features a 7/16” (11 mm)-wide, soft thermoplastic rubber movement zone that separates individual fields in the tile covering and forms the visible surface.
  • Available in four new colors to simplify the selection of a matching grout
  • Designed to allow movement and reduce stress in large, tiled areas
  • Eliminates the need for caulking
  • Prevents cracking and delamination of tiles
  • Maintenance-free
  • Offers secure edge protection for surfaces exposed to heavy-duty commercial traffic, such as warehouses, production facilities, and shopping malls
 ...read more  ...show less

Product type

Select all options to find the
specific product you want to buy.

Find recommended accessories here

Schluter®-DILEX-KSN features trapezoid-perforated anchoring legs, made of stainless steel or aluminum, which are secured in the mortar bond coat and provide edge protection for adjacent tiles. The profile separates individual fields in the tile covering and accommodates movement via the 7/16" (11 mm)-wide, soft thermoplastic rubber movement zone, which also forms the visible surface. The thermoplastic rubber movement zone can be replaced if damaged.

DILEX-KSN, with stainless steel anchoring legs, offers secure edge protection for surfaces exposed to heavy-duty commercial traffic (e.g., warehouses, production facilities, or shopping malls).

DILEX-KSN requires no special maintenance or care and is resistant to mold and fungi. Clean profile using common household cleaning agents. Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a mild household cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. All cleaning agents must be free of hydrochloric acid, hydrofluoric acid, and chlorides. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent.

Oxidation films on aluminum can be removed by using a conventional polishing agent, but will form again.

The thermoplastic rubber inserts in DILEX-KSN are replaceable.

1. Select the profile according to the tile thickness and format.

2. Using a notched trowel, apply thin-set mortar over the area where the profile is to be placed. The profile must align directly with movement joints in the substrate below.

3. Press the perforated anchoring legs of the profile into the mortar and align.

4. Trowel additional thin-set mortar over the perforated anchoring legs to ensure full coverage and support of the tile edges.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower.

6. A joint of approximately 1/16" - 1/8" (1.5 - 3 mm) should be left between the tile and the profile.

7. Fill the joint completely with grout or setting material.

Articles

tileletter-tiling-entryways-foyers-kerdi
4.35 MB
Pdf

Brochures and Pamphlets

Profiles Usage Sheet - EN
47.27 KB
Pdf
Commercial Product Overview
1.7 MB
Pdf
Profile Brochure
4.41 MB
Pdf
Profile Finishes and Colors
2.82 MB
Pdf

Product Table

11209-preview
11.27 KB
MovementJoint_Profiles
2.34 MB
Pdf

Data sheets

Movement Joints Data Sheet
2.72 MB
Pdf

Warranties

Movement Joints and Cove-Shaped Profiles Warranty
57.92 KB
Pdf
Q:

How do I cut profiles?

A:

Schluter™ profiles are available in a variety of different materials , so methods for cutting vary. Below are best practices for cutting according...

Read more

Spec. Guides

Product Spec Guide 2019
1.25 MB
Pdf

CAD drawings

schlueter_cad_dilex_ksn_inst
40.36 KB
DWG
schlueter_cad_dilex_ksn_imp
50.19 KB
DWG
schlueter_cad_dilex_ksn_metr
45.4 KB
DWG
schlueter_cad_dilex_ksn_imp
4.82 KB
Pdf
schlueter_cad_dilex_ksn_inst
9.67 KB
Pdf
schlueter_cad_dilex_ksn_metr
4.54 KB
Pdf

Specify our products using the

Specification Logo
Player

Watch & Learn
About the product

Tips on How to Choose Your Profile Size in Relation to Your Tile

Tips on How to Choose Your Profile Size in Relation to Your Tile

02:50

Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!

Watch more videos / playlists

Movement Joint Profiles / Surface & Expansion Joints

Schluter®-DILEX-F

Movement Joint Profiles / Surface & Expansion Joints

Schluter®-DILEX-EDP

Movement Joint Profiles / Surface & Expansion Joints

Schluter®-DILEX-AKWS

Movement Joint Profiles / Perimeter Joints

Schluter®-DILEX-KSA

Uncoupling (DITRA)

Schluter®-DITRA & DITRA-XL

Movement Joint Profiles / Surface & Expansion Joints

Schluter®-DILEX-EKSB

Movement Joint Profiles / Surface & Expansion Joints

Schluter®-DILEX-BT

Movement Joint Profiles / Perimeter Joints

Schluter®-DILEX-BWA