Schluter®-JOLLY

Finishing and edge-protection profile for outside wall corners and edges

Schluter®-JOLLY features a 90° angle and is a finishing and edge-protection profile for the outside corners and other tile edges in wall applications. The vertical wall section of the profile provides a decorative finish and protects adjacent tiles. Its 90° angle creates a clean, flush look on wall corner installations, and the joint spacers on both sides of the profile ensure consistent grout joints and perfect symmetry. Matching corners are available, which feature innovative plug-in connections that result in clean, visually appealing corner applications.
  • New! Now features a 90° angle and matching corners!
  • Prevents tile edges from chipping
  • Ideal for creating decorative transitions on walls
  • Ideal trim for the top edge of a tiled wall, backsplash, and bathtub surround
  • Features an integrated joint spacer that establishes a defined joint cavity between the tile and the profile
  • Anchoring leg is available with a radius perforation so that the profile can be used to form curves
  • Select finishes also available in 10’ (3.05 m) lengths
 ...read more  ...show less

Product type

Select all options to find the
specific product you want to buy.

Find recommended accessories here

Schluter®-JOLLY is a finishing and edge protection profile for the outside corners of tiled wall surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile, and a 90° vertical wall section that provides a decorative finish and protects adjacent tiles. The profile is available in chrome-plated solid brass, color-coated aluminum, textured color-coated aluminum, anodized aluminum and stainless steel.

The range of available sizes and finishes permits the matching of JOLLY to a wide variety of tile and grout colors and allows many design opportunities through the use of contrasting colors. Other applications include transitions for dado coverings such as natural stone, or cold-cured resin coatings. The integrated joint spacer establishes a defined joint cavity between the tile and the profile.

Note: JOLLY in stainless steel does not feature the integrated joint spacer in the vertical wall direction. Matching outside corners are available. Connector pins are available for abutting profiles.

The Schluter®-JOLLY profile requires no special maintenance or care and is resistant to mold and fungi. Clean profiles periodically using pH neutral cleaning agents.

Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a neutral cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. Avoid the use of strong acids (e.g. hydrochloric or hydrofluoric) and base/alkaline cleaners (e.g. bleach, ammonia, chlorides). Do not use abrasive cleaning agents and tools. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent.

Oxidation films on exposed aluminum may be removed with a common polishing agent but will form again.

In the case of chrome plated brass, anodized aluminum, color coated aluminum and textured color-coated aluminum, do not use abrasive cleaning agents.

1. Select the profile according to tile thickness and format.

2. Using a notched trowel, apply thin-set mortar to the area where the profile is to be placed. If the JOLLY profile is to be used as an edging for an outside wall corner, finish tiling one wall first then trowel thin-set mortar over the corner area of the second wall.

3. Press the perforated anchoring leg of the profile into the mortar and align.

4. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower.

6. Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16" - 1/8" (1.5 - 3 mm).

7. Fill the joint completely with grout or setting material.

8. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately, especially from aluminum.

Note: For installation of JOLLY corners: Install using JOLLY corner connector pin. The corner connector pin has one end with a snap feature to lock into the corner piece, with the opposite end featuring a spring function that engages with the channel of the JOLLY profile. The corner connector pin is first snapped into the corner piece, then slid into the profile channel for installation. Refer to assembly instructions on the corner packaging.

Data sheets

Wall and Countertop Profiles Data Sheet
1.98 MB
Pdf

Warranties

Wall and Countertop Profiles Warranty
27.28 KB
Pdf

Product Table

21590-preview
29.66 KB
JOLLY
207.54 KB
Pdf

Brochures and Pamphlets

Profile Brochure
2.14 MB
Pdf
Profile Finishes and Colors
2.45 MB
Pdf
Q:

What is the difference between Schluter®-JOLLY and Schluter®-SCHIENE profiles?

A:

SCHIENE is designed to provide edging for tile coverings on floors. Typical applications include edge protection where...

Read more
Q:

What is the difference between Schluter®-JOLLY and Schluter®-JOLLY-P profiles?

A:

JOLLY profiles' new design introduces 90° vertical wall section that allows for better alignment and appearance when abutting with other profiles...

Read more

CAD drawings

JollyMC-MKTDR06006-01
307.35 KB
Pdf
JollyA-MKTDR05957-01
306.25 KB
Pdf
JollyA-MKTDR05957-01
164.98 KB
DWG
JollyE-MKTDR06003-01
165.73 KB
DWG
JollyE-MKTDR06003-01
313.5 KB
Pdf
JollyMC-MKTDR06006-01
164.76 KB
DWG

Spec. Guides

Product Spec Guide 2019
1.25 MB
Pdf

Specify our products using the

Specification Logo
Player

Watch & Learn
About the product

Introducing the NEW Schluter®-JOLLY

Introducing the NEW Schluter®-JOLLY

00:41
How to Tile a Niche with Schluter® Profiles

How to Tile a Niche with Schluter® Profiles

11:29
Introduction to Schluter® Profiles

Introduction to Schluter® Profiles

03:35
How to choose the appropriate profile size in relation to your tile

How to choose the appropriate profile size in relation to your tile

03:10

Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!

Watch more videos / playlists

For Walls / Edging & Outside Wall Corners

Schluter®-JOLLY-P

For Walls / Edging & Outside Wall Corners

Schluter®-RONDEC

For Walls / Edging & Outside Wall Corners

Schluter®-QUADEC

For Walls / Edging & Outside Wall Corners

Schluter®-FINEC

For Walls / Edging & Outside Wall Corners

Schluter®-DECO-DE

For Walls / Edging & Outside Wall Corners

Schluter®-INDEC

For Walls / Decorative

Schluter®-DESIGNLINE