Schluter®-RONDEC-CT

Sink rail profile for countertops with recessed section for bonding tile

Schluter®-RONDEC-CT is a sink rail profile for countertops that have been fitted with a ceramic or stone tile covering. The face of the profile features a recessed section with dovetailed grooves to which field or accent tile is bonded, thus eliminating the need for ceramic trim.
  • The face of the profile features a recessed section where field or accent tile is bonded
  • Features symmetrically rounded top and bottom profile edges to match the RONDEC profile
  • Features an integrated joint spacer that creates a defined joint cavity between the tile and profile
  • Prevents tile edges from chipping
  • Matching 90° and 135° inside and outside corners available
  • Available in various finishes of anodized aluminum
 ...read more  ...show less

Product type

Select all options to find the
specific product you want to buy.

Find recommended accessories here

Schluter®-RONDEC-CT is a double-rail edging profile for countertops to be fitted with a ceramic or dimension stone tile covering. The profile features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile, while the face of the profile features a recessed section with dovetailed grooves to which field or accent tile is bonded. The top and bottom edges of the profile are symmetrically rounded (1/4" - 6 mm radius) and match the RONDEC profile. The 1-1/2" (39 mm) vertical leg of the profile hides the exposed edge of the sub-assembly. The integrated joint spacer establishes a defined joint cavity between the tile and the profile.

The profile is available in anodized aluminum and color-coated aluminum with various surface finishes allowing for decorative design and interesting accents. Matching inside and outside corners are available.

The Schluter®-RONDEC-CT profile requires no special maintenance or care and is resistant to mold and fungi. Clean profiles periodically using neutral cleaning agents.

In the case of anodized aluminum and textured color-coated aluminum do not use abrasive cleaning agents.

1. Select the profile according to tile thickness and format.

2. Using a notched trowel, apply thin-set mortar to the area where the profile is to be placed.

3. Press the perforated anchoring leg of profile into the mortar and align.

4. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower.

6. Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16" - 1/8" (1.5 - 3 mm).

7. To set tile along the face of RONDEC-CT, apply thin-set mortar to the back of the tile using a margin trowel. Press the back-buttered tiles into the face of the profile, making sure to force thin-set mortar fully into the dovetailed grooves. The tiled surface should be flush with the outer edge of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower. Note: The recessed face accepts tile widths up to 1-1/8" (29 mm).

8. Fill joints completely with grout or setting material.

9. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately, especially from aluminum.

Note: Matching corners are available for the RONDEC-CT.

Articles

Maximizing_CeramicTile_Installation_with_TrimProfiles
1.07 MB
Pdf
chw-intalling-granite-tiled-countertop
904.95 KB
Pdf

Brochures and Pamphlets

Profiles Usage Sheet - EN
47.27 KB
Pdf
Profile Brochure
4.41 MB
Pdf
Profile Finishes and Colors
2.82 MB
Pdf

Product Table

10869-preview
24.8 KB
RondecCT
266.75 KB
Pdf

Warranties

Wall and Countertop Profiles Warranty
27.28 KB
Pdf
Q:

How do I cut profiles?

A:

Schluter™ profiles are available in a variety of different materials , so methods for cutting vary. Below are best practices for cutting according...

Read more

CAD drawings

schlueter_cad_rondec_ct_inst
39.81 KB
DWG
schlueter_cad_rondec_ct_imp
113.92 KB
DWG
schlueter_cad_rondec_ct_metr
76.2 KB
DWG
schlueter_cad_rondec_ct_imp
13.37 KB
Pdf
schlueter_cad_rondec_ct_metr
12.5 KB
Pdf
schlueter_cad_rondec_ct_inst
15.97 KB
Pdf

Spec. Guides

Product Spec Guide 2019
1.25 MB
Pdf

Specify our products using the

Specification Logo
Player

Watch & Learn
About the product

Tips on How to Choose Your Profile Size in Relation to Your Tile

Tips on How to Choose Your Profile Size in Relation to Your Tile

02:50

Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!

Watch more videos / playlists

For Walls / Edging & Outside Wall Corners

Schluter®-RONDEC

Cove-shaped Profiles

Schluter®-DILEX-AHK

KERDI-BOARD Panels

Schluter®-KERDI-BOARD

For Walls / Decorative

Schluter®-RONDEC-DB

For Walls / Decorative

Schluter®-DESIGNLINE