Schluter®-KERDI-SHOWER-L/-LS

Schluter®-KERDI-SHOWER-L and Schluter®-KERDI-SHOWER-LS are prefabricated sloped shower trays with integrated KERDI waterproofing.

  • Eliminates the need for a mortar bed
  • Reduces weight and installation time
  • Convenient integrated waterproofing
  • Floor can be sloped on a single plane to KERDI-LINE, which enables the use of large-format tiles and creates interesting design opportunities
  • Available with a center drain placement or perimeter drain placement
Read more

Schluter®-KERDI-SHOWER-L and Schluter®-KERDI-SHOWER-LS are prefabricated sloped shower trays with integrated KERDI waterproofing.

  • Eliminates the need for a mortar bed
  • Reduces weight and installation time
  • Convenient integrated waterproofing
  • Floor can be sloped on a single plane to KERDI-LINE, which enables the use of large-format tiles and creates interesting design opportunities
  • Available with a center drain placement or perimeter drain placement
Configure to Price Add to
Project
Dealer
Locator
Product
Table

Product successfully added to Project List

You can now access your Project List or stay on this page

Go to Project List Continue browsing

Uppsss...

Sorry, something went wrong. Please try again later.

Continue browsing
Share
Schluter<sup class='regsign'>®</sup>-KERDI-SHOWER-L/-LS

Schluter®-KERDI-SHOWER-L/-LS

Prefabricated sloped shower trays for accommodating the KERDI-LINE linear drain
Schluter®-KERDI-SHOWER-L/-LS
Schluter®-KERDI-SHOWER-L/-LS
Schluter®-KERDI-SHOWER-L/-LS
Schluter®-KERDI-SHOWER-L/-LS
Schluter®-KERDI-SHOWER-L/-LS

Product type

Next
Schluter®-KERDI-SHOWER-L/-LS

Schluter®-KERDI-SHOWER-L and Schluter®-KERDI-SHOWER -LS are prefabricated expanded polystyrene sloped trays with integrated KERDI waterproofing specifically designed to accept the KERDI-LINE linear drain. The trays are available for wall (-LS) or center (-L) drain placement and are available in 39" x 39" (100 x 100 cm) and 55" x 55" (140 x 140 cm) sizes.

1. Any leveling of the floor must be done prior to the installation of the shower tray. If necessary, cut the tray to size prior to application. The shower base can also be extended beyond the tray using dry-pack mortar, which is in turn covered with the KERDI membrane.

2. Cut the flat end of the KERDI-SHOWER-L/-LS tray to fit around the channel support. Apply Schluter-SET, Schluter-ALL-SET, Schluter-FAST-SET, or unmodified thin-set mortar to the substrate using a 1/4" x 3/8" (6 mm x 10 mm) square- or U-notched trowel. Slide the KERDI-SHOWER-L/-LS under the edge of the channel body flush with the surface of the channel support, making certain to solidly embed the tray in the mortar. Check the underside of the tray to ensure that full coverage is achieved.

Note: When KERDI-LINE is placed at an intermediate location (e.g., center of shower), it is recommended that the KERDI SHOWER-L tray be cut by equal amounts from the ends to ensure a consistent height of the first course of tile. When KERDI-LINE is placed adjacent to a wall, cut the KERDI-SHOWER-LS tray from the thicker end to ensure a flush transition at the drain.

Downloads

Brochures and Pamphlets

Warranties

Data sheets

Handbooks

FAQ