Schluter^®-KERDI-SHOWER-T/-TS/-TT

The trays are made of lightweight, expanded polystyrene (PS40) for constructing mortar-free shower bases. Each of these sloped, prefabricated shower trays are designed to integrate with the Schluter®-KERDI-DRAIN. The KERDI-SHOWER-T is the standard tray  and are available with center drain placement is available in 38" x 60" (97 x 152 cm), 48" x 60" (122 x 152 cm), 48" x 72" (122 x 183 cm), 60" x 60" (152 x 152 cm) and 72" x 72" (183 x 183 cm) sizes. The KERDI-SHOWER-TS with an off-center drain placement is available in 38" x 60" (97 x 152 cm), for bathtub replacements. KERDI-SHOWER-TT features a thin perimeter height that simplifies curbless shower construction and is available in 36” x 36” (91 x 91 cm), 32" x 38" (81 x 97 cm), 38” x 38” (97 x 97 cm), 36" x 48" (91 x 122 cm) and 48” x 48” (122 x 122 cm) sizes. The KERDI-SHOWER-TT is also available in a neo angle configuration in 38” x 38” (97 x 97 cm). The neo-angle tray features an off-center drain placement: 12” (30.5 cm) from the 38” sides of the tray.

The substrate must be clean, even, and load bearing. Any leveling must be done prior to shower tray installation. If necessary, cut the tray to size prior to application; ideally, the tray is cut equally on all sides to ensure a consistent perimeter height. The base can also be extended beyond the tray using dry-pack mortar.

For complete installation guidelines and warranty criteria for shower applications, please download the Schluter®-Shower System Installation Handbook and view the installation videos available below.

Product Evaluations and Listings