Blend In
Down to earth elegant in a neutral bathroom, that has it all. The Schluter-Shower System was used to create this waterproof retreat. Muted tones meet impact when various textures come into play.
Search Results for
Waterproofing
Schluter®-KERDI-KERECK-F/-KERS-B
Schluter®-KERDI-KERECK-F/-KERS-B
Waterproofing
Schluter®-KERDI-KERECK-F/-KERS-B
Schluter®-KERDI-KERECK and KERDI-KERS-B are preformed, seamless corners made for waterproofing inside and outside corners of KERDI, KERDI-BOARD, and DITRA assemblies to prevent leaks and mold-growth.
Waterproofing (KERDI)
Schluter®-KERDI
Schluter®-KERDI
Waterproofing (KERDI)
Schluter®-KERDI
Schluter®-KERDI is a pliable sheet-applied waterproofing membrane and vapor-retarder designed for the direct application of tile. KERDI is ideal for use in tiled showers, bathtub surrounds, residential steam showers, and other tile applications in wet areas.
Accessories
Schluter®-KERDI-BOARD-ZSD
Schluter®-KERDI-BOARD-ZSD
Accessories
Schluter®-KERDI-BOARD-ZSD
Schluter®-KERDI-BOARD-ZSD are anchors used to provide additional mechanical attachment of KERDI-BOARD when the bond between the thin-set mortar and the substrate is questionable.
Profiles
Schluter®-KERDI-BOARD-ZW
Schluter®-KERDI-BOARD-ZW
Profiles
Schluter®-KERDI-BOARD-ZW
The Schluter®-KERDI-BOARD-ZW is a stainless steel angle profile with two perforated anchoring legs used to fasten and stabilize structures made of KERDI-BOARD. The profile is ideal for non-load-bearing partition walls and is anchored into the substrate using screws or thin-set mortar.
Accessories / Shelves
Schluter®-SHELF-N
Schluter®-SHELF-N
Accessories / Shelves
Schluter®-SHELF-N
The Schluter®-SHELF-N is a rectangular shelf designed to fit into Schluter®-KERDI-BOARD-SN/-SNLT prefabricated niches.
Accessories / Profiles
Schluter®-KERDI-LINE-FC
Schluter®-KERDI-LINE-FC
Accessories / Profiles
Schluter®-KERDI-LINE-FC
Schluter®-KERDI-LINE-FC is a cover plate for use with the KERDI-LINE linear floor drain to create a seamless look in applications where multiple drains are installed end to end.
Profiles
Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC
Profiles
Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC is a U-shaped brushed stainless steel profile with a perforated topside, and a smooth underside with anchoring leg for finishing countertops, vanities, or similar structures made with KERDI-BOARD.
Accessories
Schluter®-KERDI-BOARD-ZDK
Schluter®-KERDI-BOARD-ZDK
Accessories
Schluter®-KERDI-BOARD-ZDK
Schluter®-KERDI-BOARD-ZDK is a double-sided adhesive tape used to attach KERDI-BOARD panels in joint areas or similar.
Accessories
Schluter®-KERDI-BOARD-ZFP
Schluter®-KERDI-BOARD-ZFP
Accessories
Schluter®-KERDI-BOARD-ZFP
Schluter®-KERDI-BOARD-ZFP is a flat plastic profile, which is adhered behind the KERDI-BOARD-ZA profile to improve fastening of hardware with screws.
Accessories
Schluter®-KERDI-BOARD-ZSA
Schluter®-KERDI-BOARD-ZSA
Accessories
Schluter®-KERDI-BOARD-ZSA
Schluter®-KERDI-BOARD-ZSA is an adhesive tape for reinforcing the joint areas of KERDI-BOARD panels where waterproofing is not required.
Prefabricated Substrates
Schluter®-KERDI-SHOWER-LT/-LTS
Schluter®-KERDI-SHOWER-LT/-LTS
Prefabricated Substrates
Schluter®-KERDI-SHOWER-LT/-LTS
Schluter®-KERDI-SHOWER-LT/-LTS are prefabricated sloped shower trays with integrated KERDI waterproofing.
Accessories
Schluter®-KERDI-BOARD-ZS/-ZT
Schluter®-KERDI-BOARD-ZS/-ZT
Accessories
Schluter®-KERDI-BOARD-ZS/-ZT
Schluter®-KERDI-BOARD-ZT are galvanized steel washers used to fasten KERDI-BOARD to metal or wood stud framing. They feature tabs that penetrate the surface of the KERDI-BOARD and temporarily hold the washers in place to enable quick installation of the corresponding screws.
KERDI-BOARD-ZS are coarse thread screws used to fasten KERDI-BOARD to wood stud framing with the corresponding washers.
Natural Start
Control the all-over comfort with the DITRA-HEAT-E floor warming kit with included WiFi thermostat.
Sustainable Products and Practices at Schluter-Systems
From Red List Free materials to LEED-certified buildings, explore Schluter®-Systems’ sustainability—and find helpful sustainability-related resources.
Hey there, wood lookin'
Hey there, wood lookin'
Q:
I’m installing Schluter®-KERDI over drywall in my shower. Do I need to tape the joints between panels before installing the KERDI?
A:
No. It is not necessary to tape the joints between drywall panels before installing KERDI. If you must tape...
Read more
Q:
I accidentally poked a hole through the Schluter®-KERDI while installing the membrane. Do I need to start over or can I simply repair the hole?
A:
Holes can typically be repaired by installing a patch of KERDI or Schluter™-KERDI-BAND with...
Read more
Q:
How far up the wall do I need to install the Schluter®-KERDI?
A:
For showers and bathtub surrounds, KERDI must be carried to the height of the showerhead at minimum...
Read more
