KERDI-DRAIN-A Installation Instructions
Click here to get detailed installation information for the Schluter-KERDI-DRAIN-A.
Search Results for
Waterproofing
Schluter®-KERDI-FIX
Schluter®-KERDI-FIX
Waterproofing
Schluter®-KERDI-FIX
Schluter®-KERDI-FIX is a single-component sealing and bonding compound with a silane-modified polymer base. It is odor-neutral, UV- and weather-resistant, and contains no solvents. KERDI-FIX is elastomeric and bonds well to most materials, such as wood, stone, concrete, metal, glass, and many plastics.
Waterproofing (KERDI)
Schluter®-KERDI
Schluter®-KERDI
Waterproofing (KERDI)
Schluter®-KERDI
Schluter®-KERDI is a pliable sheet-applied waterproofing membrane and vapor-retarder designed for the direct application of tile. KERDI is ideal for use in tiled showers, bathtub surrounds, residential steam showers, and other tile applications in wet areas.
Movement Joint Profiles / Perimeter Joints
Schluter®-DILEX-BWA
Schluter®-DILEX-BWA
Movement Joint Profiles / Perimeter Joints
Schluter®-DILEX-BWA
Schluter®- DILEX-BWA is a perimeter joint profile with a rigid PVC anchoring leg and a 3/16” (5 mm)-wide, soft CPE movement zone that isolates the tile covering from fixed building elements, such as bathtubs, shower trays, and door and window frames.
Accessories
Schluter®-KERDI-BOARD-ZSD
Schluter®-KERDI-BOARD-ZSD
Accessories
Schluter®-KERDI-BOARD-ZSD
Schluter®-KERDI-BOARD-ZSD are anchors used to provide additional mechanical attachment of KERDI-BOARD when the bond between the thin-set mortar and the substrate is questionable.
Profiles
Schluter®-KERDI-BOARD-ZW
Schluter®-KERDI-BOARD-ZW
Profiles
Schluter®-KERDI-BOARD-ZW
The Schluter®-KERDI-BOARD-ZW is a stainless steel angle profile with two perforated anchoring legs used to fasten and stabilize structures made of KERDI-BOARD. The profile is ideal for non-load-bearing partition walls and is anchored into the substrate using screws or thin-set mortar.
Accessories / Shelves
Schluter®-SHELF-N
Schluter®-SHELF-N
Accessories / Shelves
Schluter®-SHELF-N
The Schluter®-SHELF-N is a rectangular shelf designed to fit into Schluter®-KERDI-BOARD-SN/-SNLT prefabricated niches.
Accessories / Profiles
Schluter®-KERDI-LINE-FC
Schluter®-KERDI-LINE-FC
Accessories / Profiles
Schluter®-KERDI-LINE-FC
Schluter®-KERDI-LINE-FC is a cover plate for use with the KERDI-LINE linear floor drain to create a seamless look in applications where multiple drains are installed end to end.
Profiles
Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC
Profiles
Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC is a U-shaped brushed stainless steel profile with a perforated topside, and a smooth underside with anchoring leg for finishing countertops, vanities, or similar structures made with KERDI-BOARD.
Accessories
Schluter®-KERDI-BOARD-ZDK
Schluter®-KERDI-BOARD-ZDK
Accessories
Schluter®-KERDI-BOARD-ZDK
Schluter®-KERDI-BOARD-ZDK is a double-sided adhesive tape used to attach KERDI-BOARD panels in joint areas or similar.
Accessories
Schluter®-KERDI-BOARD-ZFP
Schluter®-KERDI-BOARD-ZFP
Accessories
Schluter®-KERDI-BOARD-ZFP
Schluter®-KERDI-BOARD-ZFP is a flat plastic profile, which is adhered behind the KERDI-BOARD-ZA profile to improve fastening of hardware with screws.
Accessories
Schluter®-KERDI-BOARD-ZSA
Schluter®-KERDI-BOARD-ZSA
Accessories
Schluter®-KERDI-BOARD-ZSA
Schluter®-KERDI-BOARD-ZSA is an adhesive tape for reinforcing the joint areas of KERDI-BOARD panels where waterproofing is not required.
Prefabricated Substrates
Schluter®-KERDI-SHOWER-LT/-LTS
Schluter®-KERDI-SHOWER-LT/-LTS
Prefabricated Substrates
Schluter®-KERDI-SHOWER-LT/-LTS
Schluter®-KERDI-SHOWER-LT/-LTS are prefabricated sloped shower trays with integrated KERDI waterproofing.
KERDI-DRAIN Installation Instructions
Click here for a complete guide on how to install the Schluter KERDI-DRAIN in your shower.
Commercial steam showers
Find out about waterproofing requirements for commercial steam showers.
KERDI-DRAIN-H Installation Instructions
Follow this step-by-step guide on how to install the Schluter KERDI-DRAIN-H in your shower.
Q:
Does the KERDI-LINE-VARIO channel and grate assembly have to be installed wall-to-wall or can it be installed in shorter lengths?
A:
No. The KERDI-LINE-VARIO channel and grate assembly does not need to be installed wall-to-wall. It may be installed at...
Read more
Q:
If additional compensation height is required, what materials may I use?
A:
If additional compensation height is required, you may use KERDI-BOARD, tile backerboard...
Read more
Q:
Can I install the DESIGN-NICHE adjustable frame directly on the KERDI-BOARD/wall surface?
A:
Yes, if build-up from the thickness of the frame's flange is not a concern (such as with large format tile installation), you can cut a...
Read more
