Tileable covering support for KERDI-DRAIN
In response to the growing design preference for sleek, discreet drainage lines, Schluter-Systems has introduced a new tileable covering support to its Schluter-KERDI-DRAIN product line.
Search Results for
Accessories / Niches
Schluter®-DESIGN-NICHE
Schluter®-DESIGN-NICHE
Accessories / Niches
Schluter®-DESIGN-NICHE
Schluter®-DESIGN-NICHE is a prefabricated, powder-coated aluminum shower niche that provides sleek, functional storage without the need for tile. This fully waterproof niche is designed for fast, hassle-free installation, making it an ideal solution for showers, bathrooms, and other wet areas. The adjustable frame allows for flush or reveal edge installation and accommodates tile thicknesses from 3 mm (1/8") to 55 mm (2-3/16").
KERDI-BOARD Panels
Schluter®-KERDI-BOARD-SN
Schluter®-KERDI-BOARD-SN
KERDI-BOARD Panels
Schluter®-KERDI-BOARD-SN
Schluter®-KERDI-BOARD-SN is a prefabricated shower niche that is fully sealed, quick to install, and integrates with KERDI and KERDI-BOARD shower assemblies. All niche sizes include a waterproof KERDI-BAND frame to seal the seams, as well as screws and washers for fastening KERDI-BOARD-SN to stud framing.
LED Shower Niches
Schluter®-KERDI-BOARD-SNLT
Schluter®-KERDI-BOARD-SNLT
LED Shower Niches
Schluter®-KERDI-BOARD-SNLT
KERDI-BOARD-SNLT is a prefabricated shower niche that features integrated LIPROTEC LED lighting. The niche includes a waterproof cable connection box at the top of the niche to ensure a code-compliant installation of electrical components in a wet area. The kit includes a profile and a LIPROTEC light strip that inserts directly into the profile and can be installed in either a center or rear position at the top of the niche.
Accessories / Shelves
Schluter®-SHELF-N
Schluter®-SHELF-N
Accessories / Shelves
Schluter®-SHELF-N
The Schluter®-SHELF-N is a rectangular shelf designed to fit into Schluter®-KERDI-BOARD-SN/-SNLT prefabricated niches.
LED Shower Niches
Schluter®-LIPROTEC-CW
Schluter®-LIPROTEC-CW
LED Shower Niches
Schluter®-LIPROTEC-CW
The LIPROTEC-CW cable features a pre-installed waterproof snap-in gland for a secure connection to the top of the niche, and connectors to attach the LED strip.
LED Shower Niches
Schluter®-LIPROTEC-ECX
Schluter®-LIPROTEC-ECX
LED Shower Niches
Schluter®-LIPROTEC-ECX
LIPROTEC-ECX is an all-in-one LED power supply and in-wall dimmer switch that eliminates compatibility issues between drivers and dimmer switches.
LED Shower Niches
Schluter®-LIPROTEC-ECD
Schluter®-LIPROTEC-ECD
LED Shower Niches
Schluter®-LIPROTEC-ECD
LIPROTEC-ECD is an in-line dimmable driver that is hard wired into your electrical. It is compatible with a range of popular dimmer switches including smart dimmers, allowing you to have matching light switches throughout your bathroom.
For Stairs / Cover the Sub-Assembly
Schluter®-TREP-FL
Schluter®-TREP-FL
For Stairs / Cover the Sub-Assembly
Schluter®-TREP-FL
The Schluter®-TREP-FL is a decorative stair-nosing profile with a protruding rounded edge that can be integrated into stairs covered with tile or stone.
Thermostats
Schluter®-DITRA-HEAT-E-WiFi
Schluter®-DITRA-HEAT-E-WiFi
Thermostats
Schluter®-DITRA-HEAT-E-WiFi
Schluter®-DITRA-HEAT-E-WiFi is a programmable Wi-Fi thermostat used to control DITRA-HEAT-E-HK heating cables.
Schluter®-PRIMER-U
Schluter®-PRIMER-U
Schluter®-PRIMER-U is a ready-to-use universal primer used to enhance adhesion of mortars for hard-to-bond substrates such as gypsum underlayment, existing tile, terrazzo, steel (e.g. raised access panels), flooring adhesive residue, concrete with curing compounds, latex paint, and glass tile.
Schluter®-PRIMER-PS
Schluter®-PRIMER-PS
PRIMER-PS is a ready-to-use, quick-drying topical primer designed specifically for Schluter’s peel and stick membranes. It is formulated to enhance the bond of peel and stick membranes to difficult-to-bond-to surfaces such as OSB, plywood, gypsum concrete, or vinyl. PRIMER-PS can be used in interior applications where increased adhesion is required over various porous and non-porous substrates.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-F
Schluter®-DILEX-F
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-F
Schluter®-DILEX-F is a surface movement joint profile. The two-part system consists of a carrier profile with anchor legs made of rigid, recycled PVC, and a slim replaceable silicone inlay that mimics grout lines. When installed, it blends into any tile field for a seamless visible surface. The carrier profile (DILEX-FCS) has a protective cover that is removed after tile installation and replaced with the selected color of silicone inlay (DILEX-FIS). The inlay is approximately 1/8" (3 mm) wide when installed.
KERDI-LINE Drain
The new KERDI-LINE drain is an elegant low-profile alternative to traditional shower drains. This sleek and versatile linear drain is easy to install and offers an interesting array of design opportunities, including wheelchair-accessible showers.
New Schluter Website
Schluter®-Systems has launched a completely new website that simplifies navigation and provides several interactive tools that make it much easier to design and specify tile projects.
Q:
What type of thin-set mortar should I use when setting tile over Schluter®-DITRA-HEAT?
A:
Schluter-Systems requires the use of Schluter SET™ , ALL-SET™ , FAST-SET™, or an unmodified thin-set mortar meeting the requirements of ANSI A118.1 to install...
Read more
Q:
The tile I’ve chosen for my floor doesn’t have a matching cove base available. I’d rather not select another tile. Do you have any solutions?
A:
Yes. Schluter-Systems offers various profiles that allow the user to produce a finished tile base with a cove...
Read more
Q:
How do I seal Schluter®-KERDI to a bathtub?
A:
There are two methods to seal KERDI to a bathtub. Please refer to the Schluter®-Shower System Installation Handbook...
Read more
