Paver Support System for the Exterior
Schluter-TROBA-LEVEL™ is a paver support system designed specifically for use with thick porcelain tiles rated for exterior use.
Search Results for
Accessories / Niches
Schluter®-DESIGN-NICHE
Schluter®-DESIGN-NICHE
Accessories / Niches
Schluter®-DESIGN-NICHE
Schluter®-DESIGN-NICHE is a prefabricated, powder-coated aluminum shower niche that provides sleek, functional storage without the need for tile. This fully waterproof niche is designed for fast, hassle-free installation, making it an ideal solution for showers, bathrooms, and other wet areas. The adjustable frame allows for flush or reveal edge installation and accommodates tile thicknesses from 3 mm (1/8") to 55 mm (2-3/16").
KERDI-BOARD Panels
Schluter®-KERDI-BOARD-SN
Schluter®-KERDI-BOARD-SN
KERDI-BOARD Panels
Schluter®-KERDI-BOARD-SN
Schluter®-KERDI-BOARD-SN is a prefabricated shower niche that is fully sealed, quick to install, and integrates with KERDI and KERDI-BOARD shower assemblies. All niche sizes include a waterproof KERDI-BAND frame to seal the seams, as well as screws and washers for fastening KERDI-BOARD-SN to stud framing.
LED Shower Niches
Schluter®-KERDI-BOARD-SNLT
Schluter®-KERDI-BOARD-SNLT
LED Shower Niches
Schluter®-KERDI-BOARD-SNLT
KERDI-BOARD-SNLT is a prefabricated shower niche that features integrated LIPROTEC LED lighting. The niche includes a waterproof cable connection box at the top of the niche to ensure a code-compliant installation of electrical components in a wet area. The kit includes a profile and a LIPROTEC light strip that inserts directly into the profile and can be installed in either a center or rear position at the top of the niche.
Accessories / Shelves
Schluter®-SHELF-N
Schluter®-SHELF-N
Accessories / Shelves
Schluter®-SHELF-N
The Schluter®-SHELF-N is a rectangular shelf designed to fit into Schluter®-KERDI-BOARD-SN/-SNLT prefabricated niches.
LED Shower Niches
Schluter®-LIPROTEC-CW
Schluter®-LIPROTEC-CW
LED Shower Niches
Schluter®-LIPROTEC-CW
The LIPROTEC-CW cable features a pre-installed waterproof snap-in gland for a secure connection to the top of the niche, and connectors to attach the LED strip.
LED Shower Niches
Schluter®-LIPROTEC-ECX
Schluter®-LIPROTEC-ECX
LED Shower Niches
Schluter®-LIPROTEC-ECX
LIPROTEC-ECX is an all-in-one LED power supply and in-wall dimmer switch that eliminates compatibility issues between drivers and dimmer switches.
LED Shower Niches
Schluter®-LIPROTEC-ECD
Schluter®-LIPROTEC-ECD
LED Shower Niches
Schluter®-LIPROTEC-ECD
LIPROTEC-ECD is an in-line dimmable driver that is hard wired into your electrical. It is compatible with a range of popular dimmer switches including smart dimmers, allowing you to have matching light switches throughout your bathroom.
For Stairs / Cover the Sub-Assembly
Schluter®-TREP-FL
Schluter®-TREP-FL
For Stairs / Cover the Sub-Assembly
Schluter®-TREP-FL
The Schluter®-TREP-FL is a decorative stair-nosing profile with a protruding rounded edge that can be integrated into stairs covered with tile or stone.
Thermostats
Schluter®-DITRA-HEAT-E-WiFi
Schluter®-DITRA-HEAT-E-WiFi
Thermostats
Schluter®-DITRA-HEAT-E-WiFi
Schluter®-DITRA-HEAT-E-WiFi is a programmable Wi-Fi thermostat used to control DITRA-HEAT-E-HK heating cables.
Schluter®-PRIMER-U
Schluter®-PRIMER-U
Schluter®-PRIMER-U is a ready-to-use universal primer used to enhance adhesion of mortars for hard-to-bond substrates such as gypsum underlayment, existing tile, terrazzo, steel (e.g. raised access panels), flooring adhesive residue, concrete with curing compounds, latex paint, and glass tile.
Schluter®-PRIMER-PS
Schluter®-PRIMER-PS
PRIMER-PS is a ready-to-use, quick-drying topical primer designed specifically for Schluter’s peel and stick membranes. It is formulated to enhance the bond of peel and stick membranes to difficult-to-bond-to surfaces such as OSB, plywood, gypsum concrete, or vinyl. PRIMER-PS can be used in interior applications where increased adhesion is required over various porous and non-porous substrates.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-F
Schluter®-DILEX-F
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-F
Schluter®-DILEX-F is a surface movement joint profile. The two-part system consists of a carrier profile with anchor legs made of rigid, recycled PVC, and a slim replaceable silicone inlay that mimics grout lines. When installed, it blends into any tile field for a seamless visible surface. The carrier profile (DILEX-FCS) has a protective cover that is removed after tile installation and replaced with the selected color of silicone inlay (DILEX-FIS). The inlay is approximately 1/8" (3 mm) wide when installed.
Floor Warming for Shower Floors
By using a dedicated heating cable and ensuring the shower area has completed required waterproofing steps the shower floor can be warmed, just like any other tiled floor.
New Online Training
To continue the company’s commitment to industry education, Schluter has developed a series of live, online training programs that can be attended remotely.
Kerdi Drain Grates Metallic Finish
Shower grates are no longer just an opening in the floor to let the water escape – they are part of the design of the bathroom.
Q:
Can KERDI-BOARD-SNLT be installed in a steam shower?
A:
DO NOT install the KERDI-BOARD-SNLT in a commercial, continuous-use steam room or shower. For residential, intermittent-use steam shower applications, please contact...
Read more
Q:
What Primer should I use?
A:
We strongly recommend PRIMER-PS as it is the purpose-built primer to work with DITRA-PS, DITRA-HEAT-PS, and...
Read more
Q:
Does DITRA-PS have limitations for moisture?
A:
When tested according to ASTM F2170, internal relative humidity (RH) shall not exceed 95%. When tested according...
Read more
