Adapting the Drain
Schluter®-KERDI waterproofing membrane, along with drain adaptor kits were installed in over 1,200 showers at the The Choctaw Casino and Resort.
Search Results for
R
Radius available for products with this label
Waterproofing (KERDI)
Schluter®-KERDI
Schluter®-KERDI
Waterproofing (KERDI)
Schluter®-KERDI
Schluter®-KERDI is a pliable sheet-applied waterproofing membrane and vapor-retarder designed for the direct application of tile. KERDI is ideal for use in tiled showers, bathtub surrounds, residential steam showers, and other tile applications in wet areas.
For Walls / Edging & Outside Wall Corners
Schluter®-JOLLY
R
Schluter®-JOLLY
View Product Details
Schluter®-JOLLY
For Walls / Edging & Outside Wall Corners
Schluter®-JOLLY
Schluter®-JOLLY features a 90° angle and is a finishing and edge-protection profile for the outside corners and other tile edges in wall applications. The vertical wall section of the profile provides a decorative finish and protects adjacent tiles. Its 90° angle creates a clean, flush look on wall corner installations, and the joint spacers on both sides of the profile ensure consistent grout joints and perfect symmetry. Matching corners are available, which feature innovative plug-in connections that result in clean, visually appealing corner applications.
For Stairs / Cover the Sub-Assembly
Schluter®-RONDEC-STEP
Schluter®-RONDEC-STEP
For Stairs / Cover the Sub-Assembly
Schluter®-RONDEC-STEP
Schluter®-RONDEC-STEP is a finishing and edging profile for ceramic tile and dimension stone installations on countertops and stairs. The top of the profile features a symmetrically rounded edge that matches the RONDEC profile, while the vertical leg of the profile hides the exposed edge of the sub-assembly.
Waterproofing (KERDI)
Schluter®-KERDI-BAND
Schluter®-KERDI-BAND
Waterproofing (KERDI)
Schluter®-KERDI-BAND
Schluter®-KERDI-BAND is a waterproofing strip used to seal butt joints and floor/wall connections with KERDI and DITRA membranes and KERDI-BOARD building panels.
Balcony Profiles
Schluter®-BARA-RW
R
Schluter®-BARA-RW
View Product Details
Schluter®-BARA-RW
Balcony Profiles
Schluter®-BARA-RW
Schluter®-BARA-RW is an L-shaped edging profile for finishing the exposed perimeters of balconies and terraces. The profile provides a neat edge appearance while concealing and protecting the exposed edges of the setting bed against weathering and corrosion.
Profiles for LVT / LVT Applications on Stairs
Schluter®-VINPRO-STEP
Schluter®-VINPRO-STEP
Profiles for LVT / LVT Applications on Stairs
Schluter®-VINPRO-STEP
Schluter®-VINPRO-STEP is a finishing and edging profile for resilient floor covering (e.g., LVT) installations on stairs. The top of the profile features a square design and a capping flange that is ribbed to provide slip protection.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EKSB
Schluter®-DILEX-EKSB
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EKSB
Schluter®-DILEX-EKSB is a surface joint profile for thinner floor coverings, such as VCT flooring or coatings, with stainless steel anchoring legs and a 1/4" (6 mm)-wide, soft thermoplastic rubber movement zone that separates individual fields in the floor covering and forms the visible surface.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EZ
Schluter®-DILEX-EZ
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EZ
Schluter®-DILEX-EZ combines decorative design with stress-relieving function for tile and stone set in a thin bed of adhesive.
Drains / Shower Drains
Schluter®-KERDI-LINE-VARIO
Schluter®-KERDI-LINE-VARIO
Drains / Shower Drains
Schluter®-KERDI-LINE-VARIO
Schluter®-KERDI-LINE-VARIO is a variable length linear drain for tiled showers. The stainless steel channel and grate assembly can be cut to size on-site, and are therefore customizable to fit various shower sizes. The drain body is made of polypropylene and includes both PVC and ABS couplings for a simple connection to the drainpipe. KERDI-LINE-VARIO features a slim, 1-11/16” (43 mm) wide design and is offered in four grate designs to match with the latest trends in tile.
Cove-shaped Profiles
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK
Cove-shaped Profiles
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK is a stainless steel, cove-shaped profile for inside wall corners, countertop/backsplash transitions, and floor/wall transitions in applications where limited movement is expected.
Cove-shaped Profiles
Schluter®-DILEX-AHK
Schluter®-DILEX-AHK
Cove-shaped Profiles
Schluter®-DILEX-AHK
Schluter®-DILEX-AHK is a cove-shaped profile with a single anchoring leg that provides an attractive, clean, and maintenance-free alternative for inside wall corners, and countertop/backsplash and floor/wall transitions.
Cove-shaped Profiles
Schluter®-DILEX-HKW
Schluter®-DILEX-HKW
Cove-shaped Profiles
Schluter®-DILEX-HKW
Schluter®-DILEX-HKW is a PVC cove-shaped profile for inside wall corners and floor/wall transitions in applications where limited movement is expected.
Restoring the Chapel of the Séminaire de Québec with Schluter Ditra
See how DITRA and ALL-SET® supported the precise restoration of a heritage tile floor—preserving design integrity at the historic Québec Seminary Chapel.
From a Side Project to a Full-Time Innovation
Picking up where we left off in our last blog, The Spark That Ignited a Legacy, the success of the SCHIENE profile in the late 1970s quickly turned a spark of innovation into a full-blown movement. In this installment of our series, we’ll look at how Werner Schlüter expanded his vision and built a company around this revolutionary product.
Water for Elephants
Get inspired by a luxurious tiled tub surround with discreet finishing edges. Learn more at Schluter Systems.
Q:
Is the warranty transferrable?
Q:
Can I pull power from my DITRA-HEAT or other floor heating circuit to power my LIPROTEC LED?
A:
No. Floor heating should be on a dedicated circuit. You also increase the risk of accidentally miswiring the lighting into a 240V circuit.
Read more
Q:
I have a commercial property. Can the Schluter Smart Thermostat app work with my BAS (Building Automation Software) ?
