Floor Warming for Shower Floors
By using a dedicated heating cable and ensuring the shower area has completed required waterproofing steps the shower floor can be warmed, just like any other tiled floor.
Search Results for
R
Radius available for products with this label
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EZ
Schluter®-DILEX-EZ
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EZ
Schluter®-DILEX-EZ combines decorative design with stress-relieving function for tile and stone set in a thin bed of adhesive.
Cove-shaped Profiles
Schluter®-DILEX-HKU
Schluter®-DILEX-HKU
Cove-shaped Profiles
Schluter®-DILEX-HKU
Schluter®-DILEX-HKU is a stainless steel, cove-shaped profile for inside wall corners and floor/wall (including countertop/backsplash) transitions. DILEX-HKU may be used with floor coverings other than ceramic and stone tile, provided the floor coverings are fastened or adhered (i.e. no floating floors).
For Floors / Same-height Transitions
Schluter®-RENO-T
Schluter®-RENO-T
For Floors / Same-height Transitions
Schluter®-RENO-T
Schluter®-RENO-T is designed to provide transitions between existing, same-height, hard surface floor coverings, primarily in retrofit applications (e.g., ceramic or natural stone, parquet flooring, concrete pavers, laminate, etc).
For Floors / Sloped Transitions
Schluter®-RENO-RAMP/-K
Schluter®-RENO-RAMP/-K
For Floors / Sloped Transitions
Schluter®-RENO-RAMP/-K
The Schluter®-RENO-RAMP profile is designed for new floor constructions, to create a smooth transition between tile coverings and floor coverings at lower elevations. The RENO-RAMP-K profile is designed to be bonded to existing floor coverings.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-STF
Schluter®-DILEX-STF
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-STF
Schluter®-DILEX-STF is a maintenance-free aluminum expansion joint profile system designed for high-traffic areas. It comes pre-drilled, secured, and aligned with brackets at the correct installation width for easy setup.
For Floors / Same-height Transitions
Schluter®-DECO
R
Schluter®-DECO
View Product Details
Schluter®-DECO
For Floors / Same-height Transitions
Schluter®-DECO
Schluter®-DECO provides decorative lines within tile coverings and edge protection at transitions from tile coverings to other same-height surface coverings, such as wood or carpet.
Balcony Profiles
Schluter®-BARA-RWL
R
Schluter®-BARA-RWL
View Product Details
Schluter®-BARA-RWL
Balcony Profiles
Schluter®-BARA-RWL
Schluter®-BARA-RWL is a color-coated aluminum edging profile with drainage holes for the perimeters of balconies and terraces where large-format pavers are installed over loose-laid gravel or elevated sub-structures.
Profiles for LVT / LVT Applications on Walls
Schluter®-VINPRO-S
Schluter®-VINPRO-S
Profiles for LVT / LVT Applications on Walls
Schluter®-VINPRO-S
Schluter®-VINPRO-S is designed to provide a finished edge for resilient coverings (e.g., LVT) in applications that typically border floor coverings of similar heights, or as a finishing edge to wall skirting applications. The profile features a minimal and discreet reveal to enhance the coverings while offering transition and edge protection.
Uncoupling (DITRA)
Schluter®-DITRA & DITRA-XL
Schluter®-DITRA & DITRA-XL
Uncoupling (DITRA)
Schluter®-DITRA & DITRA-XL
Schluter®-DITRA and DITRA-XL are specifically designed for ceramic and stone tile installations. DITRA and DITRA-XL provide uncoupling to prevent cracked tile and grout. Made of polyethylene, DITRA and DITRA-XL serve as a waterproofing layer that protects moisture-sensitive substrates, such as plywood/OSB. Free-space on the underside of the matting provides a route for excess moisture and vapor to prevent damage to the tile layer above. DITRA and DITRA-XL perform all these functions while still providing adequate support/load distribution for the tile covering.
For Floors / Same-height Transitions
Schluter®-SCHIENE
R
Schluter®-SCHIENE
View Product Details
Schluter®-SCHIENE
For Floors / Same-height Transitions
Schluter®-SCHIENE
Schluter®-SCHIENE is an edging profile featuring an 87° angle designed to provide effective and attractive edge protection for floor tile coverings that are typically bordered by carpet, at expansion joints, or as decorative edging for stairs. The profile offers a discreet, minimum reveal which is ideal for creating elegant transitions between floor coverings.
Cove-shaped Profiles
Schluter®-DILEX-AHKA
Schluter®-DILEX-AHKA
Cove-shaped Profiles
Schluter®-DILEX-AHKA
Schluter®-DILEX-AHKA is an anodized aluminum, cove-shaped profile for transitions between walls to be tiled and previously finished floors.
Waterproofing (KERDI)
Schluter®-KERDI
Schluter®-KERDI
Waterproofing (KERDI)
Schluter®-KERDI
Schluter®-KERDI is a pliable sheet-applied waterproofing membrane and vapor-retarder designed for the direct application of tile. KERDI is ideal for use in tiled showers, bathtub surrounds, residential steam showers, and other tile applications in wet areas.
Peel & Stick DITRA-HEAT Floor Warming Membranes
Floor warming continues to be a growing trend for new and renovated homes and businesses alike. Flooring installers are using uncoupling membranes with floor heating cables because they are offer the luxury of warm tiles, combined with an ease of installation. Now, installing a floor warming system just got easier.
Raising the Bathroom Floor
If you cannot or do not wish to recess the floor or use a ramp, the use of additional materials to raise the bathroom floor is another option...
Faster, Thinner Floor Warming Installation
DITRA-HEAT Provides Floor Warming and Uncoupling in Single Layer. Ceramic and stone tiles are ideal surface coverings because they are durable, easy to maintain, and hygienic.
Q:
What temperature will my heated floor reach?
A:
Average surface temperature is 75 - 97ºF (24 - 36ºC), but the normal comfortable range is 77 - 84ºF (25 - 29ºC)...
Read more
Q:
What is Frost Safe mode?
A:
Frost Safe mode prevents the floor temperature from falling below the "Min. Floor Temperature" setpoint that is selected in "Advanced Device Settings".
Read more
Q:
What type of wall switch or dimmer is needed for the LIPROTEC-ECD driver?
A:
A single pole switch can be used for on/off function or an occupancy sensor. If dimming is desired, it needs to be one that is rated to work with an LED...
Read more
