Ducha con drenaje lineal
Obtenga más información sobre la gestión eficaz de la humedad y el drenaje para duchas con drenajes lineales.
Resultados de búsqueda para
R
Radio disponible para productos con esta etiqueta
Balcony Profiles
Schluter®-BARA-RWL
R
Schluter®-BARA-RWL
Ver detalles del producto
Schluter®-BARA-RWL
Balcony Profiles
Schluter®-BARA-RWL
Schluter®-BARA-RWL is a color-coated aluminum edging profile with drainage holes for the perimeters of balconies and terraces where large-format pavers are installed over loose-laid gravel or elevated sub-structures.
For Floors / Sloped Transitions
Schluter®-RENO-TK
R
Schluter®-RENO-TK
Ver detalles del producto
Schluter®-RENO-TK
For Floors / Sloped Transitions
Schluter®-RENO-TK
Schluter®-RENO-TK is designed to protect tile edges and provide a smooth transition from tile coverings to floor coverings at lower elevations, typically carpet.
For Floors / Sloped Transitions
Schluter®-RENO-U
Schluter®-RENO-U
For Floors / Sloped Transitions
Schluter®-RENO-U
Schluter®-RENO-U is designed to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations by abutting both surfaces.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EDP
Schluter®-DILEX-EDP
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EDP
Schluter®-DILEX-EDP is a heavy-duty stainless steel surface joint profile that protects tile edges and separates individual fields in the tile covering, ideal for areas exposed to continuous vehicular traffic.
Profiles
Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC
Profiles
Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC is a U-shaped brushed stainless steel profile with a perforated topside, and a smooth underside with anchoring leg for finishing countertops, vanities, or similar structures made with KERDI-BOARD.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-F
Schluter®-DILEX-F
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-F
Schluter®-DILEX-F is a surface movement joint profile. The two-part system consists of a carrier profile with anchor legs made of rigid, recycled PVC, and a slim replaceable silicone inlay that mimics grout lines. When installed, it blends into any tile field for a seamless visible surface. The carrier profile (DILEX-FCS) has a protective cover that is removed after tile installation and replaced with the selected color of silicone inlay (DILEX-FIS). The inlay is approximately 1/8" (3 mm) wide when installed.
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T is designed to provide smooth and even transitions between same-height resilient floor coverings, (e.g., LVT).
Profiles for LVT / LVT Applications on Stairs
Schluter®-VINPRO-STEP
Schluter®-VINPRO-STEP
Profiles for LVT / LVT Applications on Stairs
Schluter®-VINPRO-STEP
Schluter®-VINPRO-STEP is a finishing and edging profile for resilient floor covering (e.g., LVT) installations on stairs. The top of the profile features a square design and a capping flange that is ribbed to provide slip protection.
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-U
Schluter®-VINPRO-U
Profiles for LVT / LVT Applications on Floors
Schluter®-VINPRO-U
Schluter®-VINPRO-U is designed to provide a smooth transition between resilient floor coverings (e.g., LVT) and floor coverings at lower elevations. The sloped surface has been designed to eliminate trip hazards while still providing a discreet and minimal reveal.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-STF
Schluter®-DILEX-STF
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-STF
Schluter®-DILEX-STF is a maintenance-free aluminum expansion joint profile system designed for high-traffic areas. It comes pre-drilled, secured, and aligned with brackets at the correct installation width for easy setup.
For Floors / Sloped Transitions
Schluter®-RENO-RAMP/-K
Schluter®-RENO-RAMP/-K
For Floors / Sloped Transitions
Schluter®-RENO-RAMP/-K
The Schluter®-RENO-RAMP profile is designed for new floor constructions, to create a smooth transition between tile coverings and floor coverings at lower elevations. The RENO-RAMP-K profile is designed to be bonded to existing floor coverings.
For Floors / Same-height Transitions
Schluter®-RENO-T
Schluter®-RENO-T
For Floors / Same-height Transitions
Schluter®-RENO-T
Schluter®-RENO-T is designed to provide transitions between existing, same-height, hard surface floor coverings, primarily in retrofit applications (e.g., ceramic or natural stone, parquet flooring, concrete pavers, laminate, etc).
Más opciones de colores para los perfiles Schluter
DILEX: 4 nuevos colores que combinan con los colores de lechada más populares...
Q:
¿Cuál es la diferencia entre los perfiles Schluter®-JOLLY y Schluter®-JOLLY-P?
A:
JOLLY profiles' new design introduces 90° vertical wall section that allows for better alignment and appearance when abutting with other profiles...
Leer más
Q:
¿Cuál es la diferencia entre los perfiles Schluter®-JOLLY y Schluter®-SCHIENE?
A:
SCHIENE is designed to provide edging for tile coverings on floors. Typical applications include edge protection where...
Leer más
Q:
¿Se pueden instalar cables calefactores Schluter®-DITRA-HEAT-E-HK en las paredes?
A:
No, los códigos eléctricos norteamericanos no permiten el uso de cables calefactores en las paredes.
Leer más
