Curbless Showers
Open concept, or curbless showers are increasing in popularity due to their sophisticated yet simple design, and accessibility.
Search Results for
Schluter®-DITRA-HEAT-E-RRS
Schluter®-DITRA-HEAT-E-RRS
Schluter®-DITRA-HEAT-E-RRS is a power module that extends power output when used in conjunction exclusively with the DITRA-HEAT-E-RS1 smart thermostat.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EKSB
Schluter®-DILEX-EKSB
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EKSB
Schluter®-DILEX-EKSB is a surface joint profile for thinner floor coverings, such as VCT flooring or coatings, with stainless steel anchoring legs and a 1/4" (6 mm)-wide, soft thermoplastic rubber movement zone that separates individual fields in the floor covering and forms the visible surface.
Profiles for Resilient Surface Coverings / For Floors
Schluter®-VINPRO-U
Schluter®-VINPRO-U
Profiles for Resilient Surface Coverings / For Floors
Schluter®-VINPRO-U
Schluter®-VINPRO-U is designed to provide a smooth transition between resilient floor coverings (e.g., LVT) and floor coverings at lower elevations. The sloped surface has been designed to eliminate trip hazards while still providing a discreet and minimal reveal.
Profiles for Resilient Surface Coverings / For Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T
Profiles for Resilient Surface Coverings / For Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T is designed to provide smooth and even transitions between same-height resilient floor coverings, (e.g., LVT).
Cove-shaped Profiles
Schluter®-DILEX-HKS
Schluter®-DILEX-HKS
Cove-shaped Profiles
Schluter®-DILEX-HKS
Schluter®-DILEX-HKS is a heavy-duty stainless steel, cove-shaped profile for floor/wall transitions with dissimilar sized tiles.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EZ
Schluter®-DILEX-EZ
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EZ
Schluter®-DILEX-EZ combines decorative design with stress-relieving function for tile and stone set in a thin bed of adhesive.
Cove-shaped Profiles
Schluter®-DILEX-EKE
Schluter®-DILEX-EKE
Cove-shaped Profiles
Schluter®-DILEX-EKE
Schluter®-DILEX-EKE is a corner movement joint profile with rigid PVC anchoring legs and a 3/16” (5 mm)-wide, soft chlorinated polyethylene (CPE) movement zone that separates individual tile fields at floor/wall transitions and inside wall corners and forms the visible surface.
Movement Joint Profiles / Inside Corner Movement Joints
Schluter®-DILEX-BTO
Schluter®-DILEX-BTO
Movement Joint Profiles / Inside Corner Movement Joints
Schluter®-DILEX-BTO
Schluter®-DILEX-BTO is an expansion joint profile that bridges expansion joints at floor/wall transitions and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.
Accessories / Profiles
Schluter®-SHOWERPROFILE-R
Schluter®-SHOWERPROFILE-R
Accessories / Profiles
Schluter®-SHOWERPROFILE-R
The Schluter®-SHOWERPROFILE-R is a two-part wall transition profile for covering the exposed wall area where the floor slopes down to a perimeter linear drain.
Cove-shaped Profiles
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK
Cove-shaped Profiles
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK is a stainless steel, cove-shaped profile for inside wall corners, countertop/backsplash transitions, and floor/wall transitions in applications where limited movement is expected.
Cove-shaped Profiles
Schluter®-DILEX-AHK
Schluter®-DILEX-AHK
Cove-shaped Profiles
Schluter®-DILEX-AHK
Schluter®-DILEX-AHK is a cove-shaped profile with a single anchoring leg that provides an attractive, clean, and maintenance-free alternative for inside wall corners, and countertop/backsplash and floor/wall transitions.
Cove-shaped Profiles
Schluter®-DILEX-HK
Schluter®-DILEX-HK
Cove-shaped Profiles
Schluter®-DILEX-HK
Schluter®-DILEX-HK is a cove-shaped profile with rigid PVC anchoring legs and a soft CPE movement zone that separates individual tile fields at floor/wall transitions and forms the visible surface.
Innovation Workshop: Part 2
If you've completed Part 1, take the next step and join us for Innovation Workshop Part 2. Expand your knowledge of Schluter's solutions to include linear drain installations, heated floors, custom design elements and more!
CEU Accredited Live Online Training
Join our Educational Trainers for these live interactive training sessions for Architects and Designers
Q:
Can I use self-leveling compounds over Schluter®-DITRA-HEAT?
A:
No, any leveling of the subfloor must be done prior to installing the DITRA-HEAT membrane. A major benefit of DITRA-HEAT is that self-leveling...
Read more
Q:
What are the restrictions on where I can install the Schluter®-DITRA-HEAT heating cables?
A:
The DITRA-HEAT heating cables cannot be installed under vanities with no air space beneath, bathtub platforms...
Read more
Q:
What is the minimum stud spacing when installing the Schluter®-DITRA-HEAT-E-HK heating cables?
A:
A cable spacing of 3 studs between runs is standard. However, cable may also be spaced at continuously alternating 3 stud – 2 stud intervals in isolated...
Read more
