Schluter Profiles in Classic Colors
The classic looks of both black and white never seem to go out of style. To support these common design choices, Schluter®-Systems now provides black and white finish options for their most popular profiles.
Search Results for
R
Radius available for products with this label
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BT
Schluter®-DILEX-BT
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BT
Schluter®-DILEX-BT is a heavy-duty expansion joint profile that bridges expansion joints and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.
For Walls / Edging & Outside Wall Corners
Schluter®-DECO-DE
Schluter®-DECO-DE
For Walls / Edging & Outside Wall Corners
Schluter®-DECO-DE
Schluter®-DECO-DE is a stainless steel finishing and edge-protection profile for 135° outside corners of tiled surfaces.
For Walls / Heavy-duty Corners
Schluter®-ECK-KHK
Schluter®-ECK-KHK
For Walls / Heavy-duty Corners
Schluter®-ECK-KHK
Schluter®-ECK-KHK is a stainless steel profile for inside wall corners that produces a radiused edge for a clean, decorative finish. The cove-shaped design prevents the accumulation of dirt, making cleaning simple, and is therefore ideal for environments with strict hygienic requirements.
For Walls / Heavy-duty Corners
Schluter®-ECK-KI
Schluter®-ECK-KI
For Walls / Heavy-duty Corners
Schluter®-ECK-KI
Schluter®-ECK-KI is a stainless steel profile for inside wall corners that produces a clean, decorative finish. ECK-KI is subsequently bonded to the inside corners of existing tile or other wall coverings. As such, the profile can be installed as a repair so that existing, damaged corners do not have to be replaced.
Profiles
Schluter®-KERDI-BOARD-ZW
Schluter®-KERDI-BOARD-ZW
Profiles
Schluter®-KERDI-BOARD-ZW
The Schluter®-KERDI-BOARD-ZW is a stainless steel angle profile with two perforated anchoring legs used to fasten and stabilize structures made of KERDI-BOARD. The profile is ideal for non-load-bearing partition walls and is anchored into the substrate using screws or thin-set mortar.
For Walls / Heavy-duty Corners
Schluter®-ECK-K
Schluter®-ECK-K
For Walls / Heavy-duty Corners
Schluter®-ECK-K
Schluter®-ECK-K is designed as a retrofit stainless steel edging profile for outside corners of tiled walls that offers heavy-duty edge protection against mechanical stresses in commercial/industrial applications.
Profiles
Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC
Profiles
Schluter®-KERDI-BOARD-ZC
Schluter®-KERDI-BOARD-ZC is a U-shaped brushed stainless steel profile with a perforated topside, and a smooth underside with anchoring leg for finishing countertops, vanities, or similar structures made with KERDI-BOARD.
Balcony Profiles
Schluter®-BARA-RWL
R
Schluter®-BARA-RWL
View Product Details
Schluter®-BARA-RWL
Balcony Profiles
Schluter®-BARA-RWL
Schluter®-BARA-RWL is a color-coated aluminum edging profile with drainage holes for the perimeters of balconies and terraces where large-format pavers are installed over loose-laid gravel or elevated sub-structures.
For Floors / Sloped Transitions
Schluter®-RENO-TK
R
Schluter®-RENO-TK
View Product Details
Schluter®-RENO-TK
For Floors / Sloped Transitions
Schluter®-RENO-TK
Schluter®-RENO-TK is designed to protect tile edges and provide a smooth transition from tile coverings to floor coverings at lower elevations, typically carpet.
For Walls / Decorative
Schluter®-QUADEC-FS
Schluter®-QUADEC-FS
For Walls / Decorative
Schluter®-QUADEC-FS
Schluter®-QUADEC-FS is a double-rail feature strip profile that features a recessed section to which field or accent tile is bonded.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-F
Schluter®-DILEX-F
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-F
Schluter®-DILEX-F is a surface movement joint profile. The two-part system consists of a carrier profile with anchor legs made of rigid, recycled PVC, and a slim replaceable silicone inlay that mimics grout lines. When installed, it blends into any tile field for a seamless visible surface. The carrier profile (DILEX-FCS) has a protective cover that is removed after tile installation and replaced with the selected color of silicone inlay (DILEX-FIS). The inlay is approximately 1/8" (3 mm) wide when installed.
Cove-shaped Profiles
Schluter®-DILEX-HKS
Schluter®-DILEX-HKS
Cove-shaped Profiles
Schluter®-DILEX-HKS
Schluter®-DILEX-HKS is a heavy-duty stainless steel, cove-shaped profile for floor/wall transitions with dissimilar sized tiles.
Fine Profile Specifically for Glass Mosaics
Schluter®-FINEC is a finishing and edge protection profile for the external edges of delicate tile coverings and glass mosaics.
More Color Options for Schluter Profiles
DILEX: 4 new colors to match popular grout colors...
Is KERDI-FIX a suitable adhesive to glue down the VINPRO profiles?
KERDI-FIX is our recommended adhesive for installing VINPRO profiles ...
Q:
Are screws included with the VINPRO profiles?
Q:
What finishes are the VINPRO profiles available in?
A:
The VINPRO profiles are available in brushed chrome (ACGB), brushed nickel (ATGB), and brushed antique bronze (ABGB) ...
Read more
Q:
How can I choose the best profile height for my resilient covering?
A:
We recommend choosing the profile height that is up to a 0.5 mm greater than the coverings thickness ...
Read more
