Matching Finishes on Drains, Shelves, Profiles
Schluter-Systems’ popular TRENDLINE textured finishes will now be applied to the KERDI-DRAIN-STYLE series of shower drain grates and the recently launched Schluter®-SHELF shower shelves.
Search Results for
For Stairs / Cover the Sub-Assembly
TREP-FL
TREP-FL
For Stairs / Cover the Sub-Assembly
TREP-FL
The Schluter®-TREP-FL is a decorative stair-nosing profile with a protruding rounded edge that can be integrated into stairs covered with tile or stone.
Profiles
KERDI-BOARD-ZB
KERDI-BOARD-ZB
Profiles
KERDI-BOARD-ZB
The Schluter®-KERDI-BOARD-ZB is a U-shaped stainless steel profile with three perforated sides for the tiling and reinforcement of open-ended partition walls.
Profiles for LVT / LVT Applications on Stairs
VINPRO-STEP
VINPRO-STEP
Profiles for LVT / LVT Applications on Stairs
VINPRO-STEP
Schluter®-VINPRO-STEP is a finishing and edging profile for resilient floor covering (e.g., LVT) installations on stairs. The top of the profile features a square design and a capping flange that is ribbed to provide slip protection.
For Walls / Edging & Outside Wall Corners
JOLLY-P
JOLLY-P
For Walls / Edging & Outside Wall Corners
JOLLY-P
Schluter®-JOLLY-P is a PVC profile featuring an 87° angle designed to finish and protect external corners and other tile edges in wall applications. The vertical wall section of the profile provides a decorative finish and protects adjacent tiles. JOLLY-P in sizes 1/4" (6 mm) and higher features an integrated joint spacer that establishes a defined joint cavity between the tile and the profile.
Profiles
KERDI-BOARD-ZW
KERDI-BOARD-ZW
Profiles
KERDI-BOARD-ZW
The Schluter®-KERDI-BOARD-ZW is a stainless steel angle profile with two perforated anchoring legs used to fasten and stabilize structures made of KERDI-BOARD. The profile is ideal for non-load-bearing partition walls and is anchored into the substrate using screws or thin-set mortar.
For Walls / Edging & Outside Wall Corners
QUADEC
QUADEC
For Walls / Edging & Outside Wall Corners
QUADEC
Schluter®-QUADEC is a finishing and edge protection profile for tiled edges and outside corners of tiled surfaces, and is distinguished by its squared reveal surface.
Movement Joint Profiles / Surface & Expansion Joints
DILEX-EDP
DILEX-EDP
Movement Joint Profiles / Surface & Expansion Joints
DILEX-EDP
Schluter®-DILEX-EDP is a heavy-duty stainless steel surface joint profile that protects tile edges and separates individual fields in the tile covering, ideal for areas exposed to continuous vehicular traffic.
Profiles
KERDI-BOARD-ZA
KERDI-BOARD-ZA
Profiles
KERDI-BOARD-ZA
The Schluter®-KERDI-BOARD-ZA is a U-shaped brushed stainless steel profile with two perforated sides designed to finish edges of partition walls, shelves, and similar structures made with KERDI-BOARD.
For Floors / Sloped Transitions
RENO-V
RENO-V
For Floors / Sloped Transitions
RENO-V
Schluter®-RENO-V is designed to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations.
Movement Joint Profiles / Surface & Expansion Joints
DILEX-BTS
DILEX-BTS
Movement Joint Profiles / Surface & Expansion Joints
DILEX-BTS
Schluter®-DILEX-BTS is a heavy-duty expansion joint profile that bridges expansion joints and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.
For Stairs / Slip-resistant Treads
TREP-E/-EK
TREP-E/-EK
For Stairs / Slip-resistant Treads
TREP-E/-EK
Schluter®-TREP-E and TREP-EK are designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair-nosing design.
Balcony Profiles
BARA-RAK
BARA-RAK
Balcony Profiles
BARA-RAK
Schluter®-BARA-RAK is a color-coated aluminum balcony edging profile with a drip lip. It is designed to be fitted to the edges of finished sloped surfaces to form both an edging and a drip lip.
Maximizing ceramic tile installation with trim profiles
Tile Letter Magazine, Sean Gerolimatos and Lisa Schwartz
Q:
What is the difference between Schluter®-JOLLY and Schluter®-JOLLY-P profiles?
A:
JOLLY profiles' new design introduces 90° vertical wall section that allows for better alignment and appearance when abutting with other profiles...
Read more
Q:
Is the PROCUT-SQR compatible with all Schluter Profiles?
A:
The PROCUT-SQR is optimized to work with most Schluter Profile anchoring legs. It is not ideal for...
Read more
Q:
Can I install profiles around or near the DESIGN-NICHE?
