Curbless Showers
Open concept, or curbless showers are increasing in popularity due to their sophisticated yet simple design, and accessibility.
Search Results for
For Walls / Heavy-duty Corners
Schluter®-ECK-K
Schluter®-ECK-K
For Walls / Heavy-duty Corners
Schluter®-ECK-K
Schluter®-ECK-K is designed as a retrofit stainless steel edging profile for outside corners of tiled walls that offers heavy-duty edge protection against mechanical stresses in commercial/industrial applications.
Drains / Shower Drains
Schluter®-KERDI-DRAIN-H
Schluter®-KERDI-DRAIN-H
Drains / Shower Drains
Schluter®-KERDI-DRAIN-H
Schluter®-KERDI-DRAIN-H provides a horizontal connection to the drain pipe and is available in ABS or PVC with a 2" outlet.
The height compensation board, Schluter®-KERDI-SHOWER-CB can be used to accommodate the drain body and waste pipe height when installing KERDI-DRAIN-H in conjunction with the KERDI-SHOWER-T/-TS/-TT shower trays.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EDP
Schluter®-DILEX-EDP
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EDP
Schluter®-DILEX-EDP is a heavy-duty stainless steel surface joint profile that protects tile edges and separates individual fields in the tile covering, ideal for areas exposed to continuous vehicular traffic.
Uncoupling (DITRA)
Schluter®-DITRA-PS
Schluter®-DITRA-PS
Uncoupling (DITRA)
Schluter®-DITRA-PS
DITRA-PS brings the benefits of the original DITRA membrane—the multi-tasking underlayment that provides uncoupling, load distribution, waterproofing, and vapor management for durable tile installations—to a convenient peel and stick format. DITRA-PS features a pressure-sensitive adhesive (PSA) on the backside of the membrane, eliminating the need for thin-set mortar to install the membrane.
Prefabricated Substrates
Schluter®-KERDI-SHOWER-LT/-LTS
Schluter®-KERDI-SHOWER-LT/-LTS
Prefabricated Substrates
Schluter®-KERDI-SHOWER-LT/-LTS
Schluter®-KERDI-SHOWER-LT/-LTS are prefabricated sloped shower trays with integrated KERDI waterproofing.
Drains / Shower Drains
Schluter®-KERDI-LINE
Schluter®-KERDI-LINE
Drains / Shower Drains
Schluter®-KERDI-LINE
Schluter®-KERDI-LINE is a low profile linear shower drain specifically designed for bonded waterproofing assemblies. KERDI-LINE can be installed adjacent to walls or at intermediate locations in showers, wet rooms, and other applications that require waterproofing and drainage..
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-F
Schluter®-DILEX-F
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-F
Schluter®-DILEX-F is a surface movement joint profile. The two-part system consists of a carrier profile with anchor legs made of rigid, recycled PVC, and a slim replaceable silicone inlay that mimics grout lines. When installed, it blends into any tile field for a seamless visible surface. The carrier profile (DILEX-FCS) has a protective cover that is removed after tile installation and replaced with the selected color of silicone inlay (DILEX-FIS). The inlay is approximately 1/8" (3 mm) wide when installed.
Profiles for LVT / LVT Applications on Walls
Schluter®-VINPRO-RO
Schluter®-VINPRO-RO
Profiles for LVT / LVT Applications on Walls
Schluter®-VINPRO-RO
Schluter®-VINPRO-RO is a finishing and edging profile for resilient covering (e.g., LVT) installations on stairs and outside wall corners of resilient surfaces. The reveal of the profile forms a symmetrically rounded corner along the surface edge.
Profiles for LVT / LVT Applications on Stairs
Schluter®-VINPRO-STEP-R
Schluter®-VINPRO-STEP-R
Profiles for LVT / LVT Applications on Stairs
Schluter®-VINPRO-STEP-R
The VINPRO-STEP-R is a finishing and edging profile for resilient covering (e.g., LVT) installations on stairs. The top of the profile features a capping flange with a rounded leading edge, while the elongated vertical section provides increased visibility.
Waterproofing (KERDI)
Schluter®-KERDI-DS
Schluter®-KERDI-DS
Waterproofing (KERDI)
Schluter®-KERDI-DS
Schluter®- KERDI-DS is a bonded waterproofing membrane and vapor retarder with very low water vapor permeance for use in continuous-use steam rooms and similar applications.
Drains / Shower Drains
Schluter®-KERDI-DRAIN
Schluter®-KERDI-DRAIN
Drains / Shower Drains
Schluter®-KERDI-DRAIN
Schluter®-KERDI-DRAIN is a shower drain with an integrated bonding flange that provides a large contact area for a secure connection to the KERDI waterproofing membrane at the top of the assembly.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-AKWS
Schluter®-DILEX-AKWS
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-AKWS
Schluter®-DILEX-AKWS is a surface joint profile with aluminum anchoring legs that protect tile edges. It features a 1/4" (6 mm)-wide, soft PVC movement zone that separates individual fields in the tile covering and forms the visible surface.
Innovation Workshop: Part 2
If you've completed Part 1, take the next step and join us for Innovation Workshop Part 2. Expand your knowledge of Schluter's solutions to include linear drain installations, heated floors, custom design elements and more!
CEU Accredited Live Online Training
Join our Educational Trainers for these live interactive training sessions for Architects and Designers
Q:
Why is megohmmeter testing strongly recommended for Schluter®-DITRA-HEAT-E-HK heating cables?
A:
The insulation resistance test is intended to detect very small breaks throughout the cable insulation before, during, and after installation...
Read more
Q:
Can I use self-leveling compounds over Schluter®-DITRA-HEAT?
A:
No, any leveling of the subfloor must be done prior to installing the DITRA-HEAT membrane. A major benefit of DITRA-HEAT is that self-leveling...
Read more
Q:
I ran out of room for my heating cables, can I cut them or put them under my cabinets?
A:
NEVER cut or modify the heating cable in any way. This would change the cable resistance, will cause damage to the cable, and could cause cable overheating...
Read more
