Sound Control and Thermal Break
DITRA-HEAT-DUO, formerly DITRA-HEAT-TB, reduces sound transmission, in addition to warming the floor and still supporting the covering to ensure a lasting installation.
Search Results for
Schluter®-DITRA-HEAT-E-RRS
Schluter®-DITRA-HEAT-E-RRS
Schluter®-DITRA-HEAT-E-RRS is a power module that extends power output when used in conjunction exclusively with the DITRA-HEAT-E-RS1 smart thermostat.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EKSB
Schluter®-DILEX-EKSB
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EKSB
Schluter®-DILEX-EKSB is a surface joint profile for thinner floor coverings, such as VCT flooring or coatings, with stainless steel anchoring legs and a 1/4" (6 mm)-wide, soft thermoplastic rubber movement zone that separates individual fields in the floor covering and forms the visible surface.
Profiles for Resilient Surface Coverings / For Floors
Schluter®-VINPRO-U
Schluter®-VINPRO-U
Profiles for Resilient Surface Coverings / For Floors
Schluter®-VINPRO-U
Schluter®-VINPRO-U is designed to provide a smooth transition between resilient floor coverings (e.g., LVT) and floor coverings at lower elevations. The sloped surface has been designed to eliminate trip hazards while still providing a discreet and minimal reveal.
Profiles for Resilient Surface Coverings / For Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T
Profiles for Resilient Surface Coverings / For Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T is designed to provide smooth and even transitions between same-height resilient floor coverings, (e.g., LVT).
Cove-shaped Profiles
Schluter®-DILEX-HKS
Schluter®-DILEX-HKS
Cove-shaped Profiles
Schluter®-DILEX-HKS
Schluter®-DILEX-HKS is a heavy-duty stainless steel, cove-shaped profile for floor/wall transitions with dissimilar sized tiles.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EZ
Schluter®-DILEX-EZ
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EZ
Schluter®-DILEX-EZ combines decorative design with stress-relieving function for tile and stone set in a thin bed of adhesive.
Cove-shaped Profiles
Schluter®-DILEX-EKE
Schluter®-DILEX-EKE
Cove-shaped Profiles
Schluter®-DILEX-EKE
Schluter®-DILEX-EKE is a corner movement joint profile with rigid PVC anchoring legs and a 3/16” (5 mm)-wide, soft chlorinated polyethylene (CPE) movement zone that separates individual tile fields at floor/wall transitions and inside wall corners and forms the visible surface.
Movement Joint Profiles / Inside Corner Movement Joints
Schluter®-DILEX-BTO
Schluter®-DILEX-BTO
Movement Joint Profiles / Inside Corner Movement Joints
Schluter®-DILEX-BTO
Schluter®-DILEX-BTO is an expansion joint profile that bridges expansion joints at floor/wall transitions and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.
Accessories / Profiles
Schluter®-SHOWERPROFILE-R
Schluter®-SHOWERPROFILE-R
Accessories / Profiles
Schluter®-SHOWERPROFILE-R
The Schluter®-SHOWERPROFILE-R is a two-part wall transition profile for covering the exposed wall area where the floor slopes down to a perimeter linear drain.
Cove-shaped Profiles
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK
Cove-shaped Profiles
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK is a stainless steel, cove-shaped profile for inside wall corners, countertop/backsplash transitions, and floor/wall transitions in applications where limited movement is expected.
Cove-shaped Profiles
Schluter®-DILEX-AHK
Schluter®-DILEX-AHK
Cove-shaped Profiles
Schluter®-DILEX-AHK
Schluter®-DILEX-AHK is a cove-shaped profile with a single anchoring leg that provides an attractive, clean, and maintenance-free alternative for inside wall corners, and countertop/backsplash and floor/wall transitions.
Cove-shaped Profiles
Schluter®-DILEX-HK
Schluter®-DILEX-HK
Cove-shaped Profiles
Schluter®-DILEX-HK
Schluter®-DILEX-HK is a cove-shaped profile with rigid PVC anchoring legs and a soft CPE movement zone that separates individual tile fields at floor/wall transitions and forms the visible surface.
Q:
Can I use self-leveling compounds over Schluter®-DITRA-HEAT?
A:
No, any leveling of the subfloor must be done prior to installing the DITRA-HEAT membrane. A major benefit of DITRA-HEAT is that self-leveling...
Read more
Q:
What are the restrictions on where I can install the Schluter®-DITRA-HEAT heating cables?
A:
The DITRA-HEAT heating cables cannot be installed under vanities with no air space beneath, bathtub platforms...
Read more
Q:
What is the minimum stud spacing when installing the Schluter®-DITRA-HEAT-E-HK heating cables?
A:
A cable spacing of 3 studs between runs is standard. However, cable may also be spaced at continuously alternating 3 stud – 2 stud intervals in isolated...
Read more
