Sound Control and Thermal Break
DITRA-HEAT-DUO, formerly DITRA-HEAT-TB, reduces sound transmission, in addition to warming the floor and still supporting the covering to ensure a lasting installation.
Search Results for
Schluter®-DITRA-HEAT-E-RRS
Schluter®-DITRA-HEAT-E-RRS
Schluter®-DITRA-HEAT-E-RRS is a power module that extends power output when used in conjunction exclusively with the DITRA-HEAT-E-RS1 smart thermostat.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EKSB
Schluter®-DILEX-EKSB
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EKSB
Schluter®-DILEX-EKSB is a surface joint profile for thinner floor coverings, such as VCT flooring or coatings, with stainless steel anchoring legs and a 1/4" (6 mm)-wide, soft thermoplastic rubber movement zone that separates individual fields in the floor covering and forms the visible surface.
Profiles for Resilient Surface Coverings / For Floors
Schluter®-VINPRO-U
Schluter®-VINPRO-U
Profiles for Resilient Surface Coverings / For Floors
Schluter®-VINPRO-U
Schluter®-VINPRO-U is designed to provide a smooth transition between resilient floor coverings (e.g., LVT) and floor coverings at lower elevations. The sloped surface has been designed to eliminate trip hazards while still providing a discreet and minimal reveal.
Profiles for Resilient Surface Coverings / For Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T
Profiles for Resilient Surface Coverings / For Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T is designed to provide smooth and even transitions between same-height resilient floor coverings, (e.g., LVT).
Cove-shaped Profiles
Schluter®-DILEX-HKS
Schluter®-DILEX-HKS
Cove-shaped Profiles
Schluter®-DILEX-HKS
Schluter®-DILEX-HKS is a heavy-duty stainless steel, cove-shaped profile for floor/wall transitions with dissimilar sized tiles.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EZ
Schluter®-DILEX-EZ
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EZ
Schluter®-DILEX-EZ combines decorative design with stress-relieving function for tile and stone set in a thin bed of adhesive.
Cove-shaped Profiles
Schluter®-DILEX-EKE
Schluter®-DILEX-EKE
Cove-shaped Profiles
Schluter®-DILEX-EKE
Schluter®-DILEX-EKE is a corner movement joint profile with rigid PVC anchoring legs and a 3/16” (5 mm)-wide, soft chlorinated polyethylene (CPE) movement zone that separates individual tile fields at floor/wall transitions and inside wall corners and forms the visible surface.
Movement Joint Profiles / Inside Corner Movement Joints
Schluter®-DILEX-BTO
Schluter®-DILEX-BTO
Movement Joint Profiles / Inside Corner Movement Joints
Schluter®-DILEX-BTO
Schluter®-DILEX-BTO is an expansion joint profile that bridges expansion joints at floor/wall transitions and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.
Accessories / Profiles
Schluter®-SHOWERPROFILE-R
Schluter®-SHOWERPROFILE-R
Accessories / Profiles
Schluter®-SHOWERPROFILE-R
The Schluter®-SHOWERPROFILE-R is a two-part wall transition profile for covering the exposed wall area where the floor slopes down to a perimeter linear drain.
Cove-shaped Profiles
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK
Cove-shaped Profiles
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK is a stainless steel, cove-shaped profile for inside wall corners, countertop/backsplash transitions, and floor/wall transitions in applications where limited movement is expected.
Cove-shaped Profiles
Schluter®-DILEX-AHK
Schluter®-DILEX-AHK
Cove-shaped Profiles
Schluter®-DILEX-AHK
Schluter®-DILEX-AHK is a cove-shaped profile with a single anchoring leg that provides an attractive, clean, and maintenance-free alternative for inside wall corners, and countertop/backsplash and floor/wall transitions.
Cove-shaped Profiles
Schluter®-DILEX-HK
Schluter®-DILEX-HK
Cove-shaped Profiles
Schluter®-DILEX-HK
Schluter®-DILEX-HK is a cove-shaped profile with rigid PVC anchoring legs and a soft CPE movement zone that separates individual tile fields at floor/wall transitions and forms the visible surface.
Q:
How do I protect my laminate / LVT / SPC flooring or similar for a maximum floor temperature of 82°F (28°C)?
A:
In the "Advanced" settings, when in "Floor" control mode or in "Ambient" control mode, set "Max. Floor Temperature" to...
Read more
Q:
Can other manufacturer’s heating cables be installed with Schluter®-DITRA-HEAT membrane?
A:
The DITRA-HEAT-E-HK heating cables are specifically designed to integrate with the DITRA-HEAT membrane...
Read more
Q:
Why are two floor temperature sensors provided with the Schluter®-DITRA-HEAT system?
A:
Both floor temperature sensors are installed within the tile assembly. One sensor is connected to the thermostat, while...
Read more
