Elegant, Fine Profile Specifically for Glass Mosaics
Schluter®-FINEC is a finishing and edge protection profile for the external edges of delicate tile coverings and glass mosaics.
Search Results for
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EDP
Schluter®-DILEX-EDP
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EDP
Schluter®-DILEX-EDP is a heavy-duty stainless steel surface joint profile that protects tile edges and separates individual fields in the tile covering, ideal for areas exposed to continuous vehicular traffic.
Profiles for Resilient Surface Coverings / For Stairs
Schluter®-VINPRO-STEP
Schluter®-VINPRO-STEP
Profiles for Resilient Surface Coverings / For Stairs
Schluter®-VINPRO-STEP
Schluter®-VINPRO-STEP is a finishing and edging profile for resilient floor covering (e.g., LVT) installations on stairs. The top of the profile features a square design and a capping flange that is ribbed to provide slip protection.
Profiles for Resilient Surface Coverings / For Floors
Schluter®-VINPRO-U
Schluter®-VINPRO-U
Profiles for Resilient Surface Coverings / For Floors
Schluter®-VINPRO-U
Schluter®-VINPRO-U is designed to provide a smooth transition between resilient floor coverings (e.g., LVT) and floor coverings at lower elevations. The sloped surface has been designed to eliminate trip hazards while still providing a discreet and minimal reveal.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EZ
Schluter®-DILEX-EZ
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EZ
Schluter®-DILEX-EZ combines decorative design with stress-relieving function for tile and stone set in a thin bed of adhesive.
Cove-shaped Profiles
Schluter®-DILEX-AHKA
Schluter®-DILEX-AHKA
Cove-shaped Profiles
Schluter®-DILEX-AHKA
Schluter®-DILEX-AHKA is an anodized aluminum, cove-shaped profile for transitions between walls to be tiled and previously finished floors.
Cove-shaped Profiles
Schluter®-DILEX-HKU
Schluter®-DILEX-HKU
Cove-shaped Profiles
Schluter®-DILEX-HKU
Schluter®-DILEX-HKU is a stainless steel, cove-shaped profile for inside wall corners and floor/wall (including countertop/backsplash) transitions. DILEX-HKU may be used with floor coverings other than ceramic and stone tile, provided the floor coverings are fastened or adhered (i.e. no floating floors).
For Stairs / Slip-resistant Treads
Schluter®-TREP-EFK
Schluter®-TREP-EFK
For Stairs / Slip-resistant Treads
Schluter®-TREP-EFK
Schluter®-TREP-EFK is designed to provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair tread design.
Profiles
Schluter®-KERDI-BOARD-ZA
Schluter®-KERDI-BOARD-ZA
Profiles
Schluter®-KERDI-BOARD-ZA
The Schluter®-KERDI-BOARD-ZA is a U-shaped brushed stainless steel profile with two perforated sides designed to finish edges of partition walls, shelves, and similar structures made with KERDI-BOARD.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BTS
Schluter®-DILEX-BTS
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BTS
Schluter®-DILEX-BTS is a heavy-duty expansion joint profile that bridges expansion joints and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.
Profiles for Resilient Surface Coverings / For Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T
Profiles for Resilient Surface Coverings / For Floors
Schluter®-VINPRO-T
Schluter®-VINPRO-T is designed to provide smooth and even transitions between same-height resilient floor coverings, (e.g., LVT).
For Walls / Edging & Outside Wall Corners
Schluter®-RONDEC
Schluter®-RONDEC
For Walls / Edging & Outside Wall Corners
Schluter®-RONDEC
Schluter®-RONDEC is a finishing and edge-protection profile for tiled edges and outside corners of tiled surfaces. The reveal of the profile forms a symmetrically rounded corner along the surface edge.
Cove-shaped Profiles
Schluter®-DILEX-EKE
Schluter®-DILEX-EKE
Cove-shaped Profiles
Schluter®-DILEX-EKE
Schluter®-DILEX-EKE is a corner movement joint profile with rigid PVC anchoring legs and a 3/16” (5 mm)-wide, soft chlorinated polyethylene (CPE) movement zone that separates individual tile fields at floor/wall transitions and inside wall corners and forms the visible surface.
Schluter Profiles in Classic Colors
The classic looks of both black and white never seem to go out of style. To support these common design choices, Schluter®-Systems now provides black and white finish options for their most popular profiles.
More Color Options for Schluter Profiles
DILEX: 4 new colors to match popular grout colors...
Matching Finishes Available on Drains, Shelves and Profiles
Schluter-Systems’ popular TRENDLINE textured finishes will now be applied to the KERDI-DRAIN-STYLE series of shower drain grates and the recently launched Schluter®-SHELF shower shelves.
Q:
Can the corner SHELF be installed in applications where Schluter®-DILEX profiles are installed at inside wall corners as well?
A:
In general, yes. Depending on the specific DILEX profile, some applications may require a little extra effort than others...
Read more
Q:
Are there accessories available for my selected profile (e.g., end caps, corners, or connectors)?
A:
This depends on the particular profile chosen. Accessories are listed in the Schluter® Illustrated Price List with the products...
Read more
Q:
Once my tile is installed, it will be higher than the adjacent carpet. What profile would you recommend for this uneven transition?
A:
The Schluter®-RENO-TK profile provides a sloped transition between the tile and carpet and features a channel below...
Read more
