Profiles
For Floors / Same-height Transitions
Schluter®-DECO
R
Schluter®-DECO
View Product Details
Schluter®-DECO
For Floors / Same-height Transitions
Schluter®-DECO
Schluter®-DECO provides decorative lines within tile coverings and edge protection at transitions from tile coverings to other same-height surface coverings, such as wood or carpet.
For Walls / Edging & Outside Wall Corners
Schluter®-DECO-DE
Schluter®-DECO-DE
For Walls / Edging & Outside Wall Corners
Schluter®-DECO-DE
Schluter®-DECO-DE is a stainless steel finishing and edge-protection profile for 135° outside corners of tiled surfaces.
For Walls / Decorative
Schluter®-DECO-SG
Schluter®-DECO-SG
For Walls / Decorative
Schluter®-DECO-SG
Schluter®-DECO-SG is a decorative profile featuring a 1/2" (12.5 mm) or 9/16" (15 mm)-wide channel that creates an attractive shadow gap between tile courses or other wall coverings. The profile may also be used as a support channel for glass walls. The 1/2" wide channel accommodates glass walls up to a thickness of 3/8" (10 mm), and the 9/16" wide channel accommodates glass walls up to a thickness of 1/2" (12.5 mm).
For Floors / Sloped Transitions
Schluter®-RENO-RAMP/-K
Schluter®-RENO-RAMP/-K
For Floors / Sloped Transitions
Schluter®-RENO-RAMP/-K
The Schluter®-RENO-RAMP profile is designed for new floor constructions, to create a smooth transition between tile coverings and floor coverings at lower elevations. The RENO-RAMP-K profile is designed to be bonded to existing floor coverings.
For Floors / Same-height Transitions
Schluter®-RENO-T
Schluter®-RENO-T
For Floors / Same-height Transitions
Schluter®-RENO-T
Schluter®-RENO-T is designed to provide transitions between existing, same-height, hard surface floor coverings, primarily in retrofit applications (e.g., ceramic or natural stone, parquet flooring, concrete pavers, laminate, etc).
For Floors / Sloped Transitions
Schluter®-RENO-TK
R
Schluter®-RENO-TK
View Product Details
Schluter®-RENO-TK
For Floors / Sloped Transitions
Schluter®-RENO-TK
Schluter®-RENO-TK is designed to protect tile edges and provide a smooth transition from tile coverings to floor coverings at lower elevations, typically carpet.
For Floors / Sloped Transitions
Schluter®-RENO-U
Schluter®-RENO-U
For Floors / Sloped Transitions
Schluter®-RENO-U
Schluter®-RENO-U is designed to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations by abutting both surfaces.
For Floors / Sloped Transitions
Schluter®-RENO-V
Schluter®-RENO-V
For Floors / Sloped Transitions
Schluter®-RENO-V
Schluter®-RENO-V is designed to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations.
For Floors / Same-height Transitions
Schluter®-SCHIENE
R
Schluter®-SCHIENE
View Product Details
Schluter®-SCHIENE
For Floors / Same-height Transitions
Schluter®-SCHIENE
Schluter®-SCHIENE is an edging profile featuring an 87° angle designed to provide effective and attractive edge protection for floor tile coverings that are typically bordered by carpet, at expansion joints, or as decorative edging for stairs. The profile offers a discreet, minimum reveal which is ideal for creating elegant transitions between floor coverings.
For Walls / Decorative
Schluter®-DESIGNLINE
Schluter®-DESIGNLINE
For Walls / Decorative
Schluter®-DESIGNLINE
Schluter®-DESIGNLINE is a border profile used to create decorative designs in tile fields on walls. In stainless steel, the profile can also be used to produce decorative designs in floors.
For Walls / Heavy-duty Corners
Schluter®-ECK-E
Schluter®-ECK-E
For Walls / Heavy-duty Corners
Schluter®-ECK-E
Schluter®-ECK-E is a stainless steel edging profile for outside corners of tiled walls that offers excellent edge protection against mechanical stresses in commercial and industrial applications.
For Walls / Heavy-duty Corners
Schluter®-ECK-K
Schluter®-ECK-K
For Walls / Heavy-duty Corners
Schluter®-ECK-K
Schluter®-ECK-K is designed as a retrofit stainless steel edging profile for outside corners of tiled walls that offers heavy-duty edge protection against mechanical stresses in commercial/industrial applications.
For Walls / Heavy-duty Corners
Schluter®-ECK-KHK
Schluter®-ECK-KHK
For Walls / Heavy-duty Corners
Schluter®-ECK-KHK
Schluter®-ECK-KHK is a stainless steel profile for inside wall corners that produces a radiused edge for a clean, decorative finish. The cove-shaped design prevents the accumulation of dirt, making cleaning simple, and is therefore ideal for environments with strict hygienic requirements.
For Walls / Heavy-duty Corners
Schluter®-ECK-KI
Schluter®-ECK-KI
For Walls / Heavy-duty Corners
Schluter®-ECK-KI
Schluter®-ECK-KI is a stainless steel profile for inside wall corners that produces a clean, decorative finish. ECK-KI is subsequently bonded to the inside corners of existing tile or other wall coverings. As such, the profile can be installed as a repair so that existing, damaged corners do not have to be replaced.
For Walls / Edging & Outside Wall Corners
Schluter®-INDEC
Schluter®-INDEC
For Walls / Edging & Outside Wall Corners
Schluter®-INDEC
Schluter®-INDEC is an anodized aluminum profile for outside corners of tiled surfaces and tiled edges. The reveal of the profile forms a square recessed groove for modern decorative design and interesting contrasts.
For Walls / Edging & Outside Wall Corners
Schluter®-JOLLY
R
Schluter®-JOLLY
View Product Details
Schluter®-JOLLY
For Walls / Edging & Outside Wall Corners
Schluter®-JOLLY
Schluter®-JOLLY features a 90° angle and is a finishing and edge-protection profile for the outside corners and other tile edges in wall applications. The vertical wall section of the profile provides a decorative finish and protects adjacent tiles. Its 90° angle creates a clean, flush look on wall corner installations, and the joint spacers on both sides of the profile ensure consistent grout joints and perfect symmetry. Matching corners are available, which feature innovative plug-in connections that result in clean, visually appealing corner applications.
For Walls / Decorative
Schluter®-QUADEC-FS
Schluter®-QUADEC-FS
For Walls / Decorative
Schluter®-QUADEC-FS
Schluter®-QUADEC-FS is a double-rail feature strip profile that features a recessed section to which field or accent tile is bonded.
For Walls / Decorative
Schluter®-RONDEC-DB
Schluter®-RONDEC-DB
For Walls / Decorative
Schluter®-RONDEC-DB
Schluter®-RONDEC-DB is a decorative profile for walls, wainscotings, and tile bases. The profile produces a pronounced visible surface that establishes a clean line along tile edges and allows for decorative design.
For Stairs / Cover the Sub-Assembly
Schluter®-RONDEC-STEP
Schluter®-RONDEC-STEP
For Stairs / Cover the Sub-Assembly
Schluter®-RONDEC-STEP
Schluter®-RONDEC-STEP is a finishing and edging profile for ceramic tile and dimension stone installations on countertops and stairs. The top of the profile features a symmetrically rounded edge that matches the RONDEC profile, while the vertical leg of the profile hides the exposed edge of the sub-assembly.
For Stairs / Cover the Sub-Assembly
Schluter®-SCHIENE-STEP
R
Schluter®-SCHIENE-STEP
View Product Details
Schluter®-SCHIENE-STEP
For Stairs / Cover the Sub-Assembly
Schluter®-SCHIENE-STEP
Schluter®-SCHIENE-STEP is a finishing and edging profile for ceramic tile and natural stone installations on countertops, stairs, and tile-over-tile applications on walls. The top of the profile features a vertical wall section that finishes and protects the tile from damage, while the vertical leg covers the edge of the sub-assembly, top of the riser, or existing wall edge.
For Stairs / Slip-resistant Treads
Schluter®-TREP-E/-EK
Schluter®-TREP-E/-EK
For Stairs / Slip-resistant Treads
Schluter®-TREP-E/-EK
Schluter®-TREP-E and TREP-EK are designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair-nosing design.
For Stairs / Cover the Sub-Assembly
Schluter®-TREP-FL
Schluter®-TREP-FL
For Stairs / Cover the Sub-Assembly
Schluter®-TREP-FL
The Schluter®-TREP-FL is a decorative stair-nosing profile with a protruding rounded edge that can be integrated into stairs covered with tile or stone.
For Stairs / Cover the Sub-Assembly
Schluter®-TREP-TAP
Schluter®-TREP-TAP
For Stairs / Cover the Sub-Assembly
Schluter®-TREP-TAP
The Schluter®-TREP-TAP is an anodized aluminum cover profile that integrates with the TREP-S and TREP-B stair-nosing profiles to conceal the top of the riser.
Cove-shaped Profiles
Schluter®-DILEX-AHK
Schluter®-DILEX-AHK
Cove-shaped Profiles
Schluter®-DILEX-AHK
Schluter®-DILEX-AHK is a cove-shaped profile with a single anchoring leg that provides an attractive, clean, and maintenance-free alternative for inside wall corners, and countertop/backsplash and floor/wall transitions.
Cove-shaped Profiles
Schluter®-DILEX-AHKA
Schluter®-DILEX-AHKA
Cove-shaped Profiles
Schluter®-DILEX-AHKA
Schluter®-DILEX-AHKA is an anodized aluminum, cove-shaped profile for transitions between walls to be tiled and previously finished floors.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-AKWS
Schluter®-DILEX-AKWS
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-AKWS
Schluter®-DILEX-AKWS is a surface joint profile with aluminum anchoring legs that protect tile edges. It features a 1/4" (6 mm)-wide, soft PVC movement zone that separates individual fields in the tile covering and forms the visible surface.
Movement Joint Profiles / Perimeter Joints
Schluter®-DILEX-AS
Schluter®-DILEX-AS
Movement Joint Profiles / Perimeter Joints
Schluter®-DILEX-AS
Schluter®-DILEX-AS is a perimeter joint profile with a rigid PVC anchoring leg and a flexible joining leg with self-adhesive tape to bond the profile to fixed building elements, such as bathtubs, shower trays, and window frames.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BT
Schluter®-DILEX-BT
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BT
Schluter®-DILEX-BT is a heavy-duty expansion joint profile that bridges expansion joints and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.
Movement Joint Profiles / Inside Corner Movement Joints
Schluter®-DILEX-BTO
Schluter®-DILEX-BTO
Movement Joint Profiles / Inside Corner Movement Joints
Schluter®-DILEX-BTO
Schluter®-DILEX-BTO is an expansion joint profile that bridges expansion joints at floor/wall transitions and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BTS
Schluter®-DILEX-BTS
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BTS
Schluter®-DILEX-BTS is a heavy-duty expansion joint profile that bridges expansion joints and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.
Movement Joint Profiles / Perimeter Joints
Schluter®-DILEX-BWA
Schluter®-DILEX-BWA
Movement Joint Profiles / Perimeter Joints
Schluter®-DILEX-BWA
Schluter®- DILEX-BWA is a perimeter joint profile with a rigid PVC anchoring leg and a 3/16” (5 mm)-wide, soft CPE movement zone that isolates the tile covering from fixed building elements, such as bathtubs, shower trays, and door and window frames.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BWB
Schluter®-DILEX-BWB
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BWB
Schluter®-DILEX-BWB is a prefabricated surface joint profile with rigid PVC anchoring legs that protect tile edges. It features a 3/8” (10 mm)-wide, soft CPE movement zone that separates individual fields in the tile covering and forms the visible surface.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BWS
Schluter®-DILEX-BWS
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-BWS
Schluter®-DILEX-BWS is a prefabricated surface joint profile with rigid PVC anchoring legs that protect tile edges. It features a 3/16” (5 mm)-wide, soft CPE movement zone that separates individual fields in the tile covering and forms the visible surface.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EDP
Schluter®-DILEX-EDP
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EDP
Schluter®-DILEX-EDP is a heavy-duty stainless steel surface joint profile that protects tile edges and separates individual fields in the tile covering, ideal for areas exposed to continuous vehicular traffic.
Cove-shaped Profiles
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK
Cove-shaped Profiles
Schluter®-DILEX-EHK
Schluter®-DILEX-EHK is a stainless steel, cove-shaped profile for inside wall corners, countertop/backsplash transitions, and floor/wall transitions in applications where limited movement is expected.
Cove-shaped Profiles
Schluter®-DILEX-EKE
Schluter®-DILEX-EKE
Cove-shaped Profiles
Schluter®-DILEX-EKE
Schluter®-DILEX-EKE is a corner movement joint profile with rigid PVC anchoring legs and a 3/16” (5 mm)-wide, soft chlorinated polyethylene (CPE) movement zone that separates individual tile fields at floor/wall transitions and inside wall corners and forms the visible surface.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EKSB
Schluter®-DILEX-EKSB
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EKSB
Schluter®-DILEX-EKSB is a surface joint profile for thinner floor coverings, such as VCT flooring or coatings, with stainless steel anchoring legs and a 1/4" (6 mm)-wide, soft thermoplastic rubber movement zone that separates individual fields in the floor covering and forms the visible surface.
Cove-shaped Profiles
Schluter®-DILEX-HK
Schluter®-DILEX-HK
Cove-shaped Profiles
Schluter®-DILEX-HK
Schluter®-DILEX-HK is a cove-shaped profile with rigid PVC anchoring legs and a soft CPE movement zone that separates individual tile fields at floor/wall transitions and forms the visible surface.
Cove-shaped Profiles
Schluter®-DILEX-HKS
Schluter®-DILEX-HKS
Cove-shaped Profiles
Schluter®-DILEX-HKS
Schluter®-DILEX-HKS is a heavy-duty stainless steel, cove-shaped profile for floor/wall transitions with dissimilar sized tiles.
Cove-shaped Profiles
Schluter®-DILEX-HKU
Schluter®-DILEX-HKU
Cove-shaped Profiles
Schluter®-DILEX-HKU
Schluter®-DILEX-HKU is a stainless steel, cove-shaped profile for inside wall corners and floor/wall (including countertop/backsplash) transitions. DILEX-HKU may be used with floor coverings other than ceramic and stone tile, provided the floor coverings are fastened or adhered (i.e. no floating floors).
Cove-shaped Profiles
Schluter®-DILEX-HKW
Schluter®-DILEX-HKW
Cove-shaped Profiles
Schluter®-DILEX-HKW
Schluter®-DILEX-HKW is a PVC cove-shaped profile for inside wall corners and floor/wall transitions in applications where limited movement is expected.
Movement Joint Profiles / Perimeter Joints
Schluter®-DILEX-KSA
Schluter®-DILEX-KSA
Movement Joint Profiles / Perimeter Joints
Schluter®-DILEX-KSA
Schluter®-DILEX-KSA is a perimeter joint profile with a stainless steel or aluminum anchoring leg and a 3/8” (10 mm)-wide, replaceable rubber movement zone that isolates the tile covering from fixed building elements.
Movement Joint Profiles / Mortar Bed Joint Profiles
Schluter®-DILEX-MOP
Schluter®-DILEX-MOP
Movement Joint Profiles / Mortar Bed Joint Profiles
Schluter®-DILEX-MOP
Schluter®-DILEX-MOP is a screed joint profile with rigid PVC side sections that protect tile edges and a soft PVC movement zone that separates individual fields in the tile assembly and forms the visible surface.
Movement Joint Profiles / Mortar Bed Joint Profiles
Schluter®-DILEX-MP/-MPV
Schluter®-DILEX-MP/-MPV
Movement Joint Profiles / Mortar Bed Joint Profiles
Schluter®-DILEX-MP/-MPV
Schluter®-DILEX-MP is a screed joint profile with rigid PVC side sections that protect tile edges and a soft chlorinated polyethylene (CPE) movement zone that separates individual fields in the tile assembly and forms the visible surface.
Cove-shaped Profiles
Schluter®-DILEX-PHK
Schluter®-DILEX-PHK
Cove-shaped Profiles
Schluter®-DILEX-PHK
Schluter®-DILEX-PHK is a PVC, cove-shaped profile with a single anchoring leg for inside wall corners, countertop/backsplash transitions and floor/wall transitions where limited movement is expected.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-KSN
Schluter®-DILEX-KSN
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-KSN
Schluter®-DILEX-KSN is a heavy-duty surface joint profile with stainless steel or aluminum anchoring legs that protect tile edges. It features a 7/16” (11 mm)-wide, soft thermoplastic rubber movement zone that separates individual fields in the tile covering and forms the visible surface.
For Walls / Edging & Outside Wall Corners
Schluter®-RONDEC
Schluter®-RONDEC
For Walls / Edging & Outside Wall Corners
Schluter®-RONDEC
Schluter®-RONDEC is a finishing and edge-protection profile for tiled edges and outside corners of tiled surfaces. The reveal of the profile forms a symmetrically rounded corner along the surface edge.
For Countertops
Schluter®-RONDEC-CT
Schluter®-RONDEC-CT
For Countertops
Schluter®-RONDEC-CT
Schluter®-RONDEC-CT is a sink rail profile for countertops that have been fitted with a ceramic or stone tile covering. The face of the profile features a recessed section with dovetailed grooves to which field or accent tile is bonded, thus eliminating the need for ceramic trim.
For Walls / Edging & Outside Wall Corners
Schluter®-QUADEC
Schluter®-QUADEC
For Walls / Edging & Outside Wall Corners
Schluter®-QUADEC
Schluter®-QUADEC is a finishing and edge protection profile for tiled edges and outside corners of tiled surfaces, and is distinguished by its squared reveal surface.
For Walls / Edging & Outside Wall Corners
Schluter®-QUADEC-K
Schluter®-QUADEC-K
For Walls / Edging & Outside Wall Corners
Schluter®-QUADEC-K
Schluter®-QUADEC-K is a variant of the QUADEC profile without an anchoring leg. It features an open cavity that is filled with thin-set mortar to secure the profile in the assembly.
For Stairs / Slip-resistant Treads
Schluter®-TREP-G/-GK
Schluter®-TREP-G/-GK
For Stairs / Slip-resistant Treads
Schluter®-TREP-G/-GK
Schluter®-TREP-G and TREP-GK are designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for a durable, safe and visually appealing stair-nosing design. TREP-GK is subsequently bonded to existing applications (i.e. as a repair).
For Stairs / Slip-resistant Treads
Schluter®-TREP-SE-S-B
Schluter®-TREP-SE-S-B
For Stairs / Slip-resistant Treads
Schluter®-TREP-SE-S-B
Schluter®-TREP-SE, TREP-S and TREP-B are designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair-nosing design.
Movement Joint Profiles / Mortar Bed Joint Profiles
Schluter®-DILEX-DFP
Schluter®-DILEX-DFP
Movement Joint Profiles / Mortar Bed Joint Profiles
Schluter®-DILEX-DFP
Schluter®-DILEX-DFP is a movement joint profile for installation at door areas or for dividing screed surfaces.
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EZ
Schluter®-DILEX-EZ
Movement Joint Profiles / Surface & Expansion Joints
Schluter®-DILEX-EZ
Schluter®-DILEX-EZ combines decorative design with stress-relieving function for tile and stone set in a thin bed of adhesive.
For Walls
Schluter®-REMA
Schluter®-REMA
For Walls
Schluter®-REMA
Schluter®-REMA is a system for creating concealed access panels in tiled walls without impairing the visual appearance of the tile covering.
For Walls / Decorative
Schluter®-DESIGNBASE-SL
Schluter®-DESIGNBASE-SL
For Walls / Decorative
Schluter®-DESIGNBASE-SL
Schluter®-DESIGNBASE-SL is a finishing profile used as an alternative to baseboards.
For Stairs / Slip-resistant Treads
Schluter®-TREP-EFK
Schluter®-TREP-EFK
For Stairs / Slip-resistant Treads
Schluter®-TREP-EFK
Schluter®-TREP-EFK is designed to provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair tread design.
For Walls / Edging & Outside Wall Corners
Schluter®-FINEC
Schluter®-FINEC
For Walls / Edging & Outside Wall Corners
Schluter®-FINEC
Schluter®-FINEC is a finishing and edge-protection profile for the external edges of tile coverings or mosaics. The finishing leg of the profile protects the covering edges from mechanical damage, and features a very slim, elegant reveal. Available in anodized aluminium, color-coated aluminum in all TRENDLINE colors, as well as stainless steel. FINEC is ideal for protecting mitered edges, while creating a discreet trim for a minimalist design.